PRIVACY ZONE
Pan/Tilt position and the size of Masking area can be set for up to 8 privacy zones. When shooting the areas where privacy zones are set, the relevant areas will be concealed from view to protect privacy.
Privacy Zones can be set as follows:
(OTHER SET)
HOME RETURN 12HOUR
HOME POSITION 0
AUTO FLIP ON
PRIVACY ZONE ...
CAM RESET...
➜
[Enter]
KEY
(PRIVACY ZONE MAP)
1* | 2 | 3 | 4 |
5 | 6 | 7 | 8 |
➜
[Enter]
KEY
EXIT QUIT
RET
Select PRIVACY ZONE and press the [Enter] key. The PRIVACY ZONE Map appears and an asterisk "*" is placed next to the numbers set.
Use the [up, down, left, right] keys to select a number you want to set, and then press the [Enter] key.
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA | ... |
SET LEVEL | 1 |
EXIT | QUIT |
➜
[Enter] KEY
Entering the
PAN/TILT
Setup Mode
PRIVACY ZONE SET 1
SET PAN/TILT | SET |
SET AREA | ... |
SET LEVEL | 1 |
EXIT | QUIT |
➜
[Enter] KEY
The PAN/TILT
Setup is
Complete.
When the above screen appears, press the [Enter] key while the SET PAN/TILT is selected to set the Pan/Tilt position. With OSD showing "SET", use the Joystick move the Masking area to the center.
After setting the position, press the [Enter] key again to exit the PAN/TILT position setup.