PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA | ... |
SET LEVEL | 1 |
EXIT | QUIT |
➜
[Down] KEY
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA | ... |
SET LEVEL | 1 |
EXIT | QUIT |
➜
[Enter] KEY
Entering the
AREA Setup
Mode
To set the area, select "SET AREA" and then press the [Enter] key. With OSD showing "SET", use the [up, down, left, right] key to set the AREA size.
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA | SET |
SET LEVEL | 1 |
EXIT | QUIT |
➜
[Enter] KEY
The AREA
Setup is
complete.
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA | ... |
SET LEVEL | 1 |
EXIT | QUIT |
Select "SET LEVEL" and set the Level of Mask Area.
This Level can be set anywhere from 1 (black) to 8 (white), and the set level will be applied to all eight areas.
"SAVE" and exit after setting the Level to complete the settings for the Privacy Zone.
●Make the area large enough so that the relevant area can be hidden undermeath it.
CAM RESET
CAM RESET clears all the settings made so far and restores the factory default settings.
"CAMERA RESET?" message appears when you select CAM RESET. Select "CANCEL" to return to the menu setup display or select OK to restore the factory default settings.
●Be careful when performing a CAM RESET operation, as it deletes all setup values.