ZOOM SPEED
In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide).
Use the [Left] or [Right] keys in the ZOOM SPEED menu to select the speed.
|
| (CAMERA SET) |
|
| |
|
|
|
| ||
|
| CAMERA ID | OFF |
| |
|
| INT |
| ||
|
| COLOR/BW | AUTO... |
| |
|
| ZOOM SPEED |
| 3 |
|
|
| MOTION DET | OFF |
| |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
|
|
1 : Magnification x 22 takes about 18 seconds. Slowest speed
2 : Magnification x 22 takes about 10 seconds. Low speed
3 : Magnification x 22 takes about 6 seconds. High speed
4 : Magnification x 22 takes about 4 seconds. Fastest speed
MOTION DET
In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected, it sets off the Alarm signal of the Controller.
| (CAMERA SET) |
|
| |
|
|
| ||
| CAMERA ID | OFF |
| |
| INT |
| ||
| COLOR/BW | AUTO... |
| |
| ZOOM SPEED | 3 |
| |
| MOTION DET |
| ON... |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
➜
Press
[Enter]
(MOTION DET)
AREAPRESET...
SENSITIVITY MEDIUM RET
If you select ON and press the [ENTER] key, the “MOTION DET” submenu screen will come up.
The “AREA” menu, from which you can specify screen areas where the Motion Detection function will be applied, can be set to either PRESET or USER. If you set the “AREA” menu to PRESET, the Motion Detection function will be applied to the areas preset as factory defaults.
If you set the AREA menu to USER and press the [ENTER] key, you can choose from 48 areas where you want to apply the Motion Detection function. Use the [5] key and [left, right, up, down] keys to move and select the motion detection area.
Press the [5] key to assign an area or to cancel the area.