Samsung AF28FVSDADFNMG, AF28FVZDAWKNMG manual Troubleshooting

Page 31

Troubleshooting

Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.

PROBLEM

SOLUTION

The air

• Check power status and then operate the air conditioner again.

conditioner

• Switch on the circuit breaker and then operate the air conditioner again.

does not work

• Check if the air conditioner is turned off by Off timer or Smart sensor.

at all.

Operate the air conditioner again by pressing the Power

 

button.

 

 

Front panel

• Check if there is a power failure.

• Check if there is any object blocking the front panel from closing.

remains open.

Remove the object and then operate again.

 

The temperature

• Check if you have selected Turbo/Purity mode. In these modes,

adjustment is

temperature adjustment is not available.

not working.

 

 

 

 

• Check if the set temperature is higher than the current temperature.

 

• Check if the Full HD filter is blocked by dirt. If there is a lot of dust on

 

the Full HD filter, cooling performance may decrease. Clean them

 

frequently.

 

• Check if the outdoor unit is covered or installed near the obstacle.

 

Take the cover off and take the obstacle away.

Cool air does not

• If you want to operate the air conditioner in the sunlight, cover the

come out of the

outdoor unit using curtains or etc.

• If the doors or windows are open, it may cause poor cooling

air conditioner.

 

performance. Close the doors and windows.

 

• If you have selected Purity mode without selecting other mode, cool

 

air does not come out of the air conditioner. Press the Mode button

 

to select other mode.

 

• Check if the pipe length is too long. When the pipe length exceeds

 

maximum allowable pipe length, cooling performance may

 

decrease.

Air flow

• Check if you have selected good'sleep mode. In this mode, you

adjustment is

cannot adjust the air flow direction since it is set to Auto.

not working.

 

 

 

Fan speed

• Check if you have selected Dry/Turbo/good'sleep mode. In these

adjustment is

modes, fan speed is set to Auto and you cannot adjust the fan speed.

not working.

 

 

 

30

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_03794A(7).indd 30

2014-03-12 오전 10:29:55

Image 31 Contents
This product is RoHS compliant Questions or COMMENTS?Thank you for purchasing this Samsung product Air ConditionerApplicable to Affvsd only Features of your new air conditionerSeasons of effective cleaning Smart sensorContents Injury or property damage Safety precautionsFfThis may result in electric shock or fire For Power Supply Warning For Using Do not place objects or devices under the indoor unit For Cleaning Do not clean the inside of the air conditioner by yourself Checking before use Using indoor unitUsing outdoor unit Installing outdoor unitFunctions available for each model Auxiliary power switchAuxiliary power switch NFB, ELB, etc Operation rangesIndoor unit Checking the name of the partsButtons on control panel DisplayOperation with control panel Conditioner will operate with auto modeFan speed of each air outlet will differ Remote controller buttons Checking the remote controllerInserting the batteries Remote controller displayBattery changing time Storing the remote controllerDry Basic operationAuto CoolSolomode Remarks Press the button to adjust the desired temperatureExcept in Auto mode Press the button to turn on the air conditionerAir flow direction Press the button on the remote controller in the Cool modeTurbo function is only available in the Cool mode Turbo operationGoodsleep operation When the air conditioner is on and in cool modeTemperature and fan speed changes in goodsleep mode Goodsleep functions Setting the On/Off timerAir conditioner will turn on after 3 hours Your air conditioner will turn onLighting function Press the button during Cool modeTo adjust the lighting level of an indoor unit Smart sensor operationQuiet operation Auto clean operationProduct can be scratched easily Cleaning the air conditionerCleaning the indoor unit Cleaning the outdoor unit heat exchangerPull out the Full HD filter in the arrow direction Cleaning the Full HD filterRemove dust with a vacuum cleaner or running water Full HD filter filters the big dust of incoming airCleaning the Zero filter Troubleshooting Odors permeate Conditioner isWater is Heard when refrigerant flow movement changes. It is normalOpen Source Announcement Installation parts English General tools Required toolsTools for test operations Outdoor unit Choosing the installation locationInstallation space for floor type indoor unit Indoor/outdoor unit installation diagramPiping length for indoor/outdoor unit installation Outdoor unit Fixing outdoor unitInstallation accessories AccessoriesIndoor unit accessories Outdoor unit accessoriesFfDrill a hole with diameter of 60~65mm towards the outside Connecting pipesInstallation procedure Drilling a hole and fixing the indoor unitFfFlare length FfFlare processFfIncorrectly flared pipes FfPipe insulation FfTightening of connection partsIndoor Use finishing tape wind up the refrigerant pipe Connection with wire-concealed piping Connecting drain hoseFix the drain hose tightly to prevent any water leakage Connecting procedure Wiring standardElectrical work Type of outdoor unit power supply Safety information on outdoor unit power supplyFfItems to prepare How to connect your extended power cablesCable Apply heat to the contraction tube to contract it Vacuuming pipe Vacuum pumpNm = 10 kgfcm Performing leak testTest part for indoor unit Test part for outdoor unitCharging refrigerant Installing the earth wireCharge the refrigerant depending on the pipe length Check and test operation Display the temperature of indoor heat exchangerDisconnect the pipe Memo
Related manuals
Manual 52 pages 26.44 Kb Manual 54 pages 52.13 Kb