Vacuum pump
Vacuuming pipe
1.Completely connect the indoor/outdoor unit pipes.
2.Connect the manifold gauge to the service valve port of the low pressure side on the outdoor unit.
3.Execute vacuum pump for over 30 minutes.
4.After degree of vacuum has been established, open the service valve ➀~➁ as shown in the illustration.
ENGLISH
Outdoor unit
F&T Condenser
Air flow
Sensor
Compressor
Indoor unit heat
exchanger
EEV
1
Service Valve
2
Service Valve
ffVacuuming air conditioner
49
사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_03794A(7).indd 49 |