Samsung AF28FVZDAWKNMG, AF28FVSDADFNMG manual Installing the earth wire, Charging refrigerant

Page 52

Installing the earth wire

Earthing must be done by the installation specialist for your safety. ffConnect grounding electrode and the air conditioner.

-- Perform the earthing work 3 on the outdoor unit earthing terminal.

Charging refrigerant

1.Connect the manifold gauge in the low pressure side (gas) and press Set/Cancel, Mode, Temp + button simultaneously for 5 seconds to enter the refrigerant charging mode. When the outdoor unit operates, charge the refrigerant.

2.Charge the refrigerant depending on the pipe length.

-- If the installed pipe length exceeds standard length (5m), you must add 30g of refrigerant (R-410A) for every 1m. -- You do not need to charge the additional refrigerant when pipe length is less than 5m.

ENGLISH

Supplied pipe length

5m

Manifold gauge

 

Gas side

 

Liquid side

Refrigerant

 

Electronic scale

3.After charging the refrigerant, disconnect the manifold gauge from the service port and close the service cap.

4.Deactivate the refrigerant charging mode by pressing Set/Cancel, Mode, Temp + button simultaneously for 5 seconds.

• Make sure to charge refrigerant with accurate amount by using the electronic scale.

CAUTION

51

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_03794A(7).indd 51

2014-03-12 오전 10:30:03

Image 52
Contents Questions or COMMENTS? This product is RoHS compliantAir Conditioner Thank you for purchasing this Samsung productFeatures of your new air conditioner Seasons of effective cleaningSmart sensor Applicable to Affvsd onlyContents Safety precautions Injury or property damageFfThis may result in electric shock or fire For Power Supply Warning For Using Do not place objects or devices under the indoor unit For Cleaning Do not clean the inside of the air conditioner by yourself Using indoor unit Using outdoor unitInstalling outdoor unit Checking before useAuxiliary power switch Auxiliary power switch NFB, ELB, etcOperation ranges Functions available for each modelChecking the name of the parts Indoor unitDisplay Buttons on control panelOperation with control panel Conditioner will operate with auto modeFan speed of each air outlet will differ Checking the remote controller Remote controller buttonsRemote controller display Battery changing timeStoring the remote controller Inserting the batteriesBasic operation AutoCool DryPress the button to adjust the desired temperature Except in Auto modePress the button to turn on the air conditioner Solomode RemarksPress the button on the remote controller in the Cool mode Turbo function is only available in the Cool modeTurbo operation Air flow directionWhen the air conditioner is on and in cool mode Goodsleep operationTemperature and fan speed changes in goodsleep mode Setting the On/Off timer Goodsleep functionsYour air conditioner will turn on Air conditioner will turn on after 3 hoursPress the button during Cool mode To adjust the lighting level of an indoor unitSmart sensor operation Lighting functionAuto clean operation Quiet operationCleaning the air conditioner Cleaning the indoor unitCleaning the outdoor unit heat exchanger Product can be scratched easilyCleaning the Full HD filter Remove dust with a vacuum cleaner or running waterFull HD filter filters the big dust of incoming air Pull out the Full HD filter in the arrow directionCleaning the Zero filter Troubleshooting Conditioner is Odors permeateHeard when refrigerant flow movement changes. It is normal Water isOpen Source Announcement Installation parts English General tools Required toolsTools for test operations Choosing the installation location Outdoor unitInstallation space for floor type indoor unit Indoor/outdoor unit installation diagramPiping length for indoor/outdoor unit installation Fixing outdoor unit Outdoor unitAccessories Indoor unit accessoriesOutdoor unit accessories Installation accessoriesConnecting pipes Installation procedureDrilling a hole and fixing the indoor unit FfDrill a hole with diameter of 60~65mm towards the outsideFfFlare length FfFlare processFfIncorrectly flared pipes FfPipe insulation FfTightening of connection partsIndoor Use finishing tape wind up the refrigerant pipe Connection with wire-concealed piping Connecting drain hoseFix the drain hose tightly to prevent any water leakage Connecting procedure Wiring standardElectrical work Safety information on outdoor unit power supply Type of outdoor unit power supplyFfItems to prepare How to connect your extended power cablesCable Apply heat to the contraction tube to contract it Vacuum pump Vacuuming pipePerforming leak test Test part for indoor unitTest part for outdoor unit Nm = 10 kgfcmCharging refrigerant Installing the earth wireCharge the refrigerant depending on the pipe length Check and test operation Display the temperature of indoor heat exchangerDisconnect the pipe Memo
Related manuals
Manual 52 pages 26.44 Kb