Samsung AF28FVSDADFNMG manual Cleaning the Full HD filter, Dry the filter completely in the shade

Page 29

Cleaning the air conditioner

Cleaning the Full HD filter

Full HD filter filters the big dust of incoming air.

Pull out the Full HD filter in the arrow direction.

ffBefore pulling out the lower Full HD filter, take out the Zero filter first.

Push the Full HD filter to the end in the arrow direction so that it can be completely fixed.

ffAfter pushing the lower Full HD filter, push the Zero filter.

Remove dust with a vacuum cleaner or running water.

ffWhen the dust is serious, clean the filter with warm water which contains a neutral detergent. However, when rubbing out the filter with a brush, the Full HD filter may be damaged.

Dry the filter completely in the shade.

ffWhen drying the Full HD filter, make sure the filter is not exposed to direct sunlight.

• Clean the Full HD filter every 2 weeks. Cleaning term may differ depending on the usage and environmental

NOTE conditions.

28

사우디,인도,나이지리아향 FAC MEMORY 냉방_IBIM_EN_03794A(7).indd 28

2014-03-12 오전 10:29:54

Image 29 Contents
This product is RoHS compliant Questions or COMMENTS?Thank you for purchasing this Samsung product Air ConditionerSeasons of effective cleaning Features of your new air conditionerSmart sensor Applicable to Affvsd onlyContents Injury or property damage Safety precautionsFfThis may result in electric shock or fire For Power Supply Warning For Using Do not place objects or devices under the indoor unit For Cleaning Do not clean the inside of the air conditioner by yourself Using outdoor unit Using indoor unitInstalling outdoor unit Checking before useAuxiliary power switch NFB, ELB, etc Auxiliary power switchOperation ranges Functions available for each modelIndoor unit Checking the name of the partsButtons on control panel DisplayFan speed of each air outlet will differ Conditioner will operate with auto modeOperation with control panel Remote controller buttons Checking the remote controllerBattery changing time Remote controller displayStoring the remote controller Inserting the batteriesAuto Basic operationCool DryExcept in Auto mode Press the button to adjust the desired temperaturePress the button to turn on the air conditioner Solomode RemarksTurbo function is only available in the Cool mode Press the button on the remote controller in the Cool modeTurbo operation Air flow directionGoodsleep operation When the air conditioner is on and in cool modeTemperature and fan speed changes in goodsleep mode Goodsleep functions Setting the On/Off timerAir conditioner will turn on after 3 hours Your air conditioner will turn onTo adjust the lighting level of an indoor unit Press the button during Cool modeSmart sensor operation Lighting functionQuiet operation Auto clean operationCleaning the indoor unit Cleaning the air conditionerCleaning the outdoor unit heat exchanger Product can be scratched easilyRemove dust with a vacuum cleaner or running water Cleaning the Full HD filterFull HD filter filters the big dust of incoming air Pull out the Full HD filter in the arrow directionCleaning the Zero filter Troubleshooting Odors permeate Conditioner isWater is Heard when refrigerant flow movement changes. It is normalOpen Source Announcement Installation parts English Tools for test operations Required toolsGeneral tools Outdoor unit Choosing the installation locationPiping length for indoor/outdoor unit installation Indoor/outdoor unit installation diagramInstallation space for floor type indoor unit Outdoor unit Fixing outdoor unitIndoor unit accessories AccessoriesOutdoor unit accessories Installation accessoriesInstallation procedure Connecting pipesDrilling a hole and fixing the indoor unit FfDrill a hole with diameter of 60~65mm towards the outsideFfIncorrectly flared pipes FfFlare processFfFlare length Indoor Use finishing tape wind up the refrigerant pipe FfTightening of connection partsFfPipe insulation Fix the drain hose tightly to prevent any water leakage Connecting drain hoseConnection with wire-concealed piping Electrical work Wiring standardConnecting procedure Type of outdoor unit power supply Safety information on outdoor unit power supplyCable How to connect your extended power cablesFfItems to prepare Apply heat to the contraction tube to contract it Vacuuming pipe Vacuum pumpTest part for indoor unit Performing leak testTest part for outdoor unit Nm = 10 kgfcmCharge the refrigerant depending on the pipe length Installing the earth wireCharging refrigerant Disconnect the pipe Display the temperature of indoor heat exchangerCheck and test operation Memo
Related manuals
Manual 52 pages 26.44 Kb Manual 54 pages 52.13 Kb