Samsung AR12JQFNBWKXMG Cleaning the air conditioner, Cleaning the outdoor unit heat exchanger

Page 25

Cleaning the air conditioner

Make sure to turn off the power of the indoor unit and cut-off

CAUTION the power supply before cleaning the air conditioner. Cleaning the indoor unit

Wipe the surface of the unit with a slightly damp micro fiber cloth when needed.

• Contact the service center when you clean the indoor unit

heat exchanger because it needs to be disassembled.

Since the panel of the indoor unit is easily scratched, you should use a micro fiber cloth to clean the panel.

When you use the micro fiber cloth, slightly dampen the cloth and remove any debris on the cloth to avoid scratches.

• Do not clean the display using alkaline detergent.

 

• Do not use sulfuric acid, hydrochloric acid, organic solvents

CAUTION

 

(such as thinner, kerosene and acetone etc.) to clean the

 

 

surface of the product or put any stickers on it.

 

They may damage the surface of the air conditioner.

SR06 OTHE

Cleaning the outdoor unit heat exchanger

When dust accumulates on the heat exchanger, it may decrease cooling performance. Therefore, clean it regularly.

Spray water to clean the dust.

• If it is difficult to clean the outdoor unit heat exchanger on

your own, contact service center.

• Be careful with the sharp edges on the CAUTION outdoor unit heat exchanger.

Heat exchanger

(Illustration may differ slightly depending on the models)

English-25

MG_GOOD_R-410A_A3050_IB&IM_EN_DB68-04540A.indd 25

9/1/2014 5:10:51 PM

Image 25
Contents Air Conditioner Features of your new air conditioner Contents English-4 Safety precautions01epPr aration English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningOperation ranges Checking before useEnglish-10 English-11 Technical SpecificationsMain parts Checking the name of the partsDisplay English-12Remote controller buttons Checking the remote controllerEnglish-13 Low Battery warning Remote controller displayStoring the remote controller Inserting the batteriesBasic function Press the button to set the desired fan speed Press the button to adjust the temperatureEnglish-16 Vertical air flow Adjusting the air flow directionHorizontal air flow English-17Setting the On timer Setting the On/Off timerPress the SET button FfPress the Power button English-18English-19 Setting the Off timerEnglish-20 ModeAdditional options available English-21 Step cooling functionUsing the Comfort function Using the Fast functionEnglish-22 Press the Single user button on the remote controller Using the Single User functionEnglish-23 Setting the Beep sound Using the Auto Clean functionLighting in Auto clean mode English-24Cleaning the outdoor unit heat exchanger Cleaning the air conditionerEnglish-25 Heat exchangerRemoving the Air filter Cleaning the air filterEnglish-26 Remove the air filter from the main bodyEnglish-27 Reassembling the Air filterTop of the Air filter into the main body.. ➀ English-28 Maintaining the air conditionerAir conditioner TroubleshootingEnglish-29 Take the cover off and takePress the Power Error is indicatedOdors permeate Water is droppingEnglish-31 General information07stIn llan atio Installing the unit Choosing the installation locationPower supply line, fuse or circuit breaker Indoor unitOutdoor Unit Where sulfide gas existsEnglish-33 When the air outlet is towards the wall When installing more than 1 outdoor unitEnglish-34  Figure DescriptionAccessories in the indoor unit case AccessoriesAccessories in the outdoor unit case English-35Optional accessories Fixing the installation plateTools required for installation General Tools Tools for test operationsEnglish-37 Assembling the hanger screwRemoving the screws This QR code for detail video of indoor unit installationRemoving the Cover panel Before mounting the indoor unit English-38English-39 Assembling the Cover panel After mounting the indoor unitCable specification Connecting the assembly cableConnecting the cable English-40Each wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryEnglish-41 Smooth the cut edges English-42Cut off the remaining foam insulation TorqueCutting or extending the pipe Evacuating the indoor unitEnglish-43 Unscrew the caps at the end of each pipeCorrect Inclined English-44Cracked English-45 Drain hose installationEnglish-46 Change the direction only when it is necessaryShield Downwards as seen in the pictureEnglish-47 Evacuating the connected pipesConnect a drain hose to the drain plug Drain hole Drain plugEnglish-48 Adding RefrigerantOuter Torque Please fill in with indelible ink English-491975 English-50 Performing the gas leak testsFixing the outdoor unit in place Outdoor unit installed on the wall by rackEnglish-51 English-52 Smart Install modeOff / Blinking / On English-53English-54 Final check and trial operationEnglish-55 Packing and unpacking guideEnglish-56 How to connect your extended power cablesApply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withEnglish-57 0211 Questions or COMMENTS?
Related manuals
Manual 60 pages 59.79 Kb Manual 60 pages 21.81 Kb