Samsung VCU8563S1R/XAC manual Vacuum Cleaner Assembly, Checking Parts, Attaching Handle to cleaner

Page 4

Vacuum Cleaner Assembly

Checking Parts

You should have the following items when you unpack your vacuum cleaner:

A. Owner’s manual

B.Handle section(with 4 screws)

C.Hose

D. Extension wands (Telescopic, Friction)

E. Crevice tool F. Cleaner body

G. Powered hand tool (Turbine Brush)

H. Dusting Brush

I. Upholstery Brush (Furniture nozzle)

A BC D E FG H I

Attaching Handle to cleaner

1 Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body.

2 Check to be sure the handle is fitted to the cleaner

body. If there is a gap in front, continue to push firmly until the handle is flush.

3 Insert the two screws provided into the existing holes. Tighten the screws securely with a screwdriver. Before securing the handle, please check that the handle is fitted to the vacuum body and there’s no gap between them. If there is a gap or loosen the screw, cleaner won’t be turned on.

Attach Handle to Dirt cup

The dirt cup assembly consists of the following parts; * Dirt cup (A)

* Handle (B)

1 Unlock the dirt cup from the cleaner body.
Insert the dirt cup handle into the dirt cup as shown.
2 Press firmly until it locks in place.
3 Insert the dirt cup into the cleaner body and lock.	B	A

EN-4

Image 4

Contents EN Vacuum Cleaner Important Safety Instructions Assembled Vacuum Cleaner Parts Vacuum Cleaner DescriptionEN-3 Vacuum Cleaner Assembly Attaching Handle to cleanerChecking Parts Attach Handle to Dirt cupSnap the hose into the hose clip as shown Attaching the Hose and ToolsEN-5 Power Control Brush roll switchOperation Handle ReleasePowerfoot Height Adjustment Edge Cleaning FeatureCleaning Tool Attachments Circuit BreakerPower Cord Arrangement Transporting CleanerCarrying Cleaner Cord ClipMaintenance Dirt-Cup Full or Filter clogged IndicatorCleaning Dirt cup Cleaning the Case-FilterReplace Drive Belt Check Rotating Floor Brush and Drive BeltEN-10 Headlight Replacement Clearing ClogsTurbine Brush Replace Agitator brush roll Replace beltOptional accessories EN-13Troubleshooting ProblemPossible solution EN-14Instructions Directives DE Sureté Importantes FR-2Assemblage de l ’aspirateur FR-3Assemblage de l’aspirateur Vérification des piècesAssemblement de la poignée à l’aspirateur Assemblement de la poignée au contenant de poussièreAssemblement du boyau et accessoires FR-5Fonctions Interrupteur arrêt/départ variabilité de succionBouton d’inclinaison de l’aspirateur Interrupteur du rouleauNettoyage avec les accessoires CircuitNiveaux d’ajustement du rouleau Nettoyage à la bordureCorde d’alimentation Attache pour corde d’alimentationManoeuvrabilité de l’aspirateur Transporter votre aspirateurEntretien Contenant de poussière plein, indicateur du filtre bouchéNettoyer le contenant de poussière Nettoyer la cage du filtreVérification du rouleau et de la courroie Remplacer la courroieObstructions Remplacer l’ampouleBalai à air Remplacer le rouleau Accessoires optionnels FR-13Problèmes Solution possibleProblème