Samsung VCU8563S1R/XAC manual Troubleshooting, Problem, Possible solution, EN-14

Page 14

Troubleshooting

Check this list of possible problems and solutions before bringing your vacuum to a service center. If you have a problem you cannot solve, please call 1-800-SAMSUNG.

Problem

CLEANER WON’T TURN ON

•Not firmly plugged in.

•No voltage in wall plug.

•Blown fuse or tripped breaker.

•On/Off switch not turned on.

CLEANER WON’T PICK UP

Possible solution

•Plug unit in firmly.

•Check fuse or breaker.

•Replace fuse or reset breaker.

•Slide to on.

•Tighten the screw of the handle.

•Circuit breaker tripped.

•Agitator brush rolls worn.

•Dirt cup full.

•Incorrect carpet height setting.

•Blockage in air flow passage.

•Pre-filter clogged.

•Dirt cup not properly installed.

•Filter assembly not assembled properly.

•Blockage in hose.

•Broken belt.

•Hose not inserted fully.

LIGHT WILL NOT WORK

•Burned out light bulb.

ABNORMAL SOUND

•Strange sound like air rushes

•Reset circuit breaker.

•Replace brush rolls.

•Empty dirt cup.

•Move nozzle control knob to lower settings.

•Clear HEPA cartridge filter by eighter tapping the side of the dirt cup.

•Clean pre-filter.

•Position dirt cup properly.

•Ensure that filter assembly is positioned properly.

•Clear blockage.

•Replace belt.

•Clean hose or nozzle area.

•Replace light bulb.

•Check for clogs.

EN-14

Image 14

Contents EN Vacuum Cleaner Important Safety Instructions EN-3 Vacuum Cleaner DescriptionAssembled Vacuum Cleaner Parts Checking Parts Vacuum Cleaner AssemblyAttaching Handle to cleaner Attach Handle to Dirt cupEN-5 Attaching the Hose and ToolsSnap the hose into the hose clip as shown Operation Power ControlBrush roll switch Handle ReleaseCleaning Tool Attachments Powerfoot Height AdjustmentEdge Cleaning Feature Circuit BreakerCarrying Cleaner Power Cord ArrangementTransporting Cleaner Cord ClipCleaning Dirt cup MaintenanceDirt-Cup Full or Filter clogged Indicator Cleaning the Case-FilterEN-10 Check Rotating Floor Brush and Drive BeltReplace Drive Belt Headlight Replacement Clearing ClogsTurbine Brush Replace Agitator brush roll Replace beltOptional accessories EN-13Possible solution TroubleshootingProblem EN-14Instructions Directives DE Sureté Importantes FR-2Assemblage de l ’aspirateur FR-3Assemblement de la poignée à l’aspirateur Assemblage de l’aspirateurVérification des pièces Assemblement de la poignée au contenant de poussièreAssemblement du boyau et accessoires FR-5Bouton d’inclinaison de l’aspirateur FonctionsInterrupteur arrêt/départ variabilité de succion Interrupteur du rouleauNiveaux d’ajustement du rouleau Nettoyage avec les accessoiresCircuit Nettoyage à la bordureManoeuvrabilité de l’aspirateur Corde d’alimentationAttache pour corde d’alimentation Transporter votre aspirateurNettoyer le contenant de poussière EntretienContenant de poussière plein, indicateur du filtre bouché Nettoyer la cage du filtreVérification du rouleau et de la courroie Remplacer la courroieObstructions Remplacer l’ampouleBalai à air Remplacer le rouleau Accessoires optionnels FR-13Problème Solution possibleProblèmes