Samsung VCU8563S1R/XAC Maintenance, Dirt-Cup Full or Filter clogged Indicator, Cleaning Dirt cup

Page 9

Maintenance

Dirt-Cup Full or Filter clogged Indicator

The Dirt-Cup Full Indicator on the front of the vacuum shows a red or green dis- play. When the Dirt-Cup display is green, the Dirt-Cup is not yet full or the filter is not clogged. When the indicator

turns to red, the Dirt-Cup needs to be emptied or the filter needs to be cleaned.

If the display is still red after emptying the dust container, turn the cleaner off to see if the hose, tube, or nozzle is clogged .

Cleaning Dirt cup

1 Unplug the Cleaner from electrical outlet.

2 The Dirt cup can be reached by removing the Dirt Container, reaching underneath the Upper Tank and turning the rim of the Filter Frame to unlock. Pull straight down to remove. Brush the dirt off the Louvers and Dirt cup.

3 The foam Upper Tank Filter may be removed and hand washed in cold water with mild detergent. Rinse well then air dry throughly before replacing.

Cleaning the Case-Filter

1 Unplug the Cleaner from electrical outlet.

2 The Case-Filter assembly can be reached by pulling the Case-Filter assembly from the cleaner.

3 Remove the cover from the Case-Filter, and the foam may be removed and hand-washed in cold water with mild detergent, then air dried.

4 Reposition Filters when completely dry.

Cleaning the Exhaust HEPA Filter

1 Unplug the Cleaner from electrical outlet.

2 The Exhaust HEPA Filter assists in the filtration process to return clean air to the room. It is located behind the door on the side of the cleaner. If the filter becomes dirty open the door, remove the filter clean. To remove this filter, open the door on the side of the cleaner, grasp filter and pull it straight out.

3 Reposition the exhaust filter, then lock the door.

EN-9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents EN Vacuum Cleaner Important Safety Instructions Vacuum Cleaner Description Assembled Vacuum Cleaner PartsEN-3 Attaching Handle to cleaner Vacuum Cleaner AssemblyChecking Parts Attach Handle to Dirt cupAttaching the Hose and Tools Snap the hose into the hose clip as shownEN-5 Brush roll switch Power ControlOperation Handle ReleaseEdge Cleaning Feature Powerfoot Height AdjustmentCleaning Tool Attachments Circuit BreakerTransporting Cleaner Power Cord ArrangementCarrying Cleaner Cord ClipDirt-Cup Full or Filter clogged Indicator MaintenanceCleaning Dirt cup Cleaning the Case-FilterCheck Rotating Floor Brush and Drive Belt Replace Drive BeltEN-10 Clearing Clogs Headlight ReplacementReplace belt Turbine Brush Replace Agitator brush rollEN-13 Optional accessoriesProblem TroubleshootingPossible solution EN-14Instructions FR-2 Directives DE Sureté ImportantesFR-3 Assemblage de l ’aspirateurVérification des pièces Assemblage de l’aspirateurAssemblement de la poignée à l’aspirateur Assemblement de la poignée au contenant de poussièreFR-5 Assemblement du boyau et accessoiresInterrupteur arrêt/départ variabilité de succion FonctionsBouton d’inclinaison de l’aspirateur Interrupteur du rouleauCircuit Nettoyage avec les accessoiresNiveaux d’ajustement du rouleau Nettoyage à la bordureAttache pour corde d’alimentation Corde d’alimentationManoeuvrabilité de l’aspirateur Transporter votre aspirateurContenant de poussière plein, indicateur du filtre bouché EntretienNettoyer le contenant de poussière Nettoyer la cage du filtreRemplacer la courroie Vérification du rouleau et de la courroieRemplacer l’ampoule ObstructionsBalai à air Remplacer le rouleau FR-13 Accessoires optionnelsSolution possible ProblèmesProblème
Top Page Image Contents