Samsung VCU8563S1R/XAC manual Clearing Clogs, Headlight Replacement

Page 11

Unplug cleaner from electrical outlet. Empty Dirt Cup.

Check Case filter for build up or clogs.

Maintenance

Clearing Clogs

Low suction or poor pickup may be due to a clog in the vaccum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs.

1

2

3

4Remove the Case filter and check the suction inlet for a clog.

5 Grasp the Quick Reach Handle and lift Hose Wand to separate from the suction opening. Check for a clog in the Base, the Wand or the Hose.

6 Remove the screw attaching the Hose Wand Base to the vaccum. Straighten the Hose Wand Base and unclog with long, narrow object.

7Turn the vacuum cleaner off and unplug it. Remove the brush cover, check the air passageway for obstructions. Remove debris from this area. Reposition brush cover and eight screws. Tighten screws securely, snap end of brush cover into place.

Headlight Replacement

1

2

3

4

5

Disconnect cleaner from electrical outlet.

Unscrew the two screws on window lamp. then lift window lamp off.

Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.

Place tabs on window lamp into slot. Press on window lamp and secure other tab.

Replace and tighten two screws.

EN-11

Image 11

Contents EN Vacuum Cleaner Important Safety Instructions EN-3 Vacuum Cleaner DescriptionAssembled Vacuum Cleaner Parts Attach Handle to Dirt cup Vacuum Cleaner AssemblyAttaching Handle to cleaner Checking PartsEN-5 Attaching the Hose and ToolsSnap the hose into the hose clip as shown Handle Release Power ControlBrush roll switch OperationCircuit Breaker Powerfoot Height AdjustmentEdge Cleaning Feature Cleaning Tool AttachmentsCord Clip Power Cord ArrangementTransporting Cleaner Carrying CleanerCleaning the Case-Filter MaintenanceDirt-Cup Full or Filter clogged Indicator Cleaning Dirt cupEN-10 Check Rotating Floor Brush and Drive BeltReplace Drive Belt Clearing Clogs Headlight ReplacementReplace belt Turbine Brush Replace Agitator brush rollEN-13 Optional accessoriesEN-14 TroubleshootingProblem Possible solutionInstructions FR-2 Directives DE Sureté ImportantesFR-3 Assemblage de l ’aspirateurAssemblement de la poignée au contenant de poussière Assemblage de l’aspirateurVérification des pièces Assemblement de la poignée à l’aspirateurFR-5 Assemblement du boyau et accessoiresInterrupteur du rouleau FonctionsInterrupteur arrêt/départ variabilité de succion Bouton d’inclinaison de l’aspirateurNettoyage à la bordure Nettoyage avec les accessoiresCircuit Niveaux d’ajustement du rouleauTransporter votre aspirateur Corde d’alimentationAttache pour corde d’alimentation Manoeuvrabilité de l’aspirateurNettoyer la cage du filtre EntretienContenant de poussière plein, indicateur du filtre bouché Nettoyer le contenant de poussièreRemplacer la courroie Vérification du rouleau et de la courroieRemplacer l’ampoule ObstructionsBalai à air Remplacer le rouleau FR-13 Accessoires optionnelsProblème Solution possibleProblèmes