Samsung AR24HSFSEWKNMG manual Cleaning and Maintenance

Problem	Solution
I cannot change	• When the Auto, Dry, or Fast mode is running or the good'sleep
	function is running in the Cool mode, the air conditioner controls
the fan speed.
	the fan speed automatically and you cannot change the fan speed.
	• Replace the batteries in the remote control with new ones.
The remote control	• Make sure that nothing is blocking the remote control sensor.
	• Check whether there are strong lighting apparatus near the air
does not work.
	conditioner. Strong light which comes from fluorescent bulbs or
	neon signs may interrupt the electric waves.
The Timed on/off	• Check whether you pressed the SET button on the remote control
function does not
	after setting the time.
work.
The indicator	• Press the Power button to turn off the air conditioner or disconnect
blinks	the power plug. If the indicator is still blinking, contact the service
continuously.	centre.
	• Check whether the air conditioner is running in a smoky area.
Odours permeate	Ventilate the room or operate the air conditioner in the Fan
in the room during	mode for 3 to 4 hours. (There are no components used in the air
operation.	conditioner that emit a strong odour.)
	• Check whether the drains are clean. Clean them regularly.
An error is	• If the indoor unit indicator blinks, contact the nearest service
indicated.	centre. Be sure to pass the error code to the service centre.
Noise is generated.	• When refrigerant flow changes, noise may be generated, depending
	on the status of the air conditioner. This is a normal operation.
Smoke is	• If may not be a fire but it can be a steam generated from the
generated from	outdoor heat exchanger while the defrost function is running in the
the outdoor unit.	Heat mode in winter.
Water drops
from the pipe	• Condensation may develop when the ambient temperature changes
connections of the	excessively. This is a normal operation.
outdoor unit.

Cleaning and Maintenance

English 29

DB68-06043A-00.indd 29

4/1/2016 5:44:24 PM