Chapter 4. Remote control
67
OnScreen display
OnScreen Display ▼
2nd | 3rd | Description | |
|
|
| |
Display Orientation | Onscreen Menu Orientation | Set the menu screen orientation. | |
| Source Content Orientation | Set the orientation of content from external devices connected to the product. | |
| Aspect Ratio | Set the rotated screen to be either full screen or original. | |
|
| • Available only when Source Content Orientation is set to Portrait. | |
Screen Protection | Auto Protection Time | If the screen displays a still image for a certain period of time you define, the product activates the screen saver to | |
|
| prevent the formation of burnt in ghost images on the screen. | |
| Screen Burn Protection | To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention | |
|
| technology. | |
|
| Screen Burn Protection moves the picture slightly on the screen. | |
|
| The Screen Burn Protection Time setting allows you to programme the time between movements of the picture in | |
|
| minutes. | |
|
| • | Pixel Shift |
|
|
| ‒ Minimize image retention by finely moving pixels horizontally or vertically. |
|
|
| ‒ Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a |
|
|
| defect in the product. |
|
|
| ‒ If Picture Size is set to Screen Fit, Pixel Shift is disabled. |
|
| • | Timer |
|
|
| ‒ You can set the timer for Screen Burn Protection. |
|
|
| ‒ The Screen Burn Protection feature stops automatically after a specified period of time. |
|
| • | Immediate Display |
|
|
| ‒ Select the screen saver you want to display immediately. |
|
| • | Side Gray |
|
|
| ‒ When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. |
Message Display | Source Info | Select whether to display the source OSD when the input source changes. |