Chapter 4. Remote control
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1Right click the Network icon on the bottom right of the screen.
2In the
3On the dialog that appears, click the Support tab.
4On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1Set Network type to Wireless from the Network Settings page.
2The Network function searches for available wireless networks. When done, it displays a list of the available networks.
3In the list of networks, press the or button to select a network, and then press the 
button twice.
‒If the desired wireless router does not appear, select Refresh to search again.
‒If the router cannot be found after retrying, select the Stop button.
4If the Enter password. screen appears, go to step 5. If you select a wireless router that does not have security, go to step 7.
5If the router has security, enter the Enter password. (Security key or PIN).
6When done, use the right arrow button to move the cursor to Done, and then press
. The network connection screen appears and the verification process starts.
7Select Stop while network connections are being attempted. This will stop the connection.
8Select IP Settings on network connection screen. The IP Settings screen appears.
9Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry process for each field in the IP Address.
74
‒Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
10 When done, select OK at the bottom of the page, and then press 
. The network test screen appears and the verification process starts.
11 When the connection has been verified, the “Yourwireless network and Internet connection are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1Set Network type to Wireless from the Network Settings page.
2Select WPS(PBC), press 
.
3Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all the network setting values it needs and connects to your network.
4The network connection screen appears, and network setup is done.