Samsung LH32MLEPLSC/NG, LH55MLEPLSC/NG manual Clock Set, Dst

Chapter 4. Remote control

System ▼

76

2nd	3rd	Description
	Clock Set	Select Clock Set. Select Date or Time, and then press	.
		Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
		buttons to move from one entry field to the next. Press		when done.

•You can set the Date and Time directly by pressing the number buttons on the remote control.

	DST	Switches the DST (Daylight Saving Time) function on or off.
	Sleep Timer	Automatically shuts off the product after a preset period of time.
		• Use the up and down arrows to select a period of time, and then press	. To cancel Sleep Timer, select Off.
	Power On Delay	When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
		the range 0–50 seconds).
Auto Source Switching		Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the
		display will automatically search the different video input sources for active video.
	Auto Source Switching	When the Auto Source Switching is On, the display video source will automatically be searched for active video.
		The Primary Source selection will be activated, if the current video source is not recognized.
		Secondary Source selection will become active, if no primary video source is available.
		If both the primary and secondary input sources are not recognized, the display will perform two searches for an
		active source, each search checking the primary and then secondary source. If both searches fail, the display will
		return to the first video source and display a message indicating that there is no signal.
		When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
		looking for an active video source, returning back to the first video source in the sequence if no video is found.
	Primary Source Recovery	Select whether to restore the selected primary input source when a primary input source is connected.
		• The Primary Source Recovery function is disabled if Primary Source is set to All.
	Primary Source	Specify Primary Source for the automatic input source.
	Secondary Source	Specify Secondary Source for the automatic input source.
		• The Secondary Source Recovery function is disabled if Primary Source is set to All.
Power Control	Auto Power On	This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.