Samsung WD10J6410AX/SV manual LC1

Troubleshooting

Troubleshooting Troubleshooting

Problem		Action
	Check the drain hose.
LC	• Make sure the end of the drain hose is placed on the floor.
	•	Make sure the drain hose is not clogged.
	• If the information code remains, contact a customer service
		centre.
		NOTE
LC1		When the washer displays the “LC/LC1” code, the washer do
		draining for 3 minutes. During this time, the Power button is
		inoperative.
	Spinning does not work.
	• Make sure laundry is spread out evenly.
UB	• Make sure the washing machine is on a flat, stable surface.
	•	Redistribute the load. If only one item of clothing needs
		washing, such as a bathrobe or pair of jeans, the final spin
		result might be unsatisfactory, and an “UB” check message
		will be shown in the display.
	Check the motor for operation.
3C	• Try restarting the cycle.
	•	If the information code remains, contact a customer service
		centre.
	The electronic control needs to be checked (Over Voltage Error).
	• Check the PCB and wire harness.
	• Check if power is supplied properly
	• If the information code remains, contact a customer service
UC		centre.
	Low voltage detected.
	• Check if the power cord is plugged in.
	• If the information code remains, contact a customer service
		centre.
	High temperature heating check.
HC	•	If the information code remains, contact a customer service
		centre.

54  English

WD10J6410AX_DC68-03591V_EN.indd 54

2015/5/13 15:48:27