Samsung WD10J6410AX/SV manual Position the drain hose

Installation

STEP 5  Position the drain hose

Installation

The drain hose can be positioned in three ways:

 A



Over the edge of a wash basin

The drain hose must be placed at a height of between 60 cm and 90 cm (*) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage.

ln a sink drain pipe

The drain pipe must be above the sink siphon so that the end of the hose is at least 60 cm above the floor.

ln a drain pipe

The drain pipe should be between 60 cm and 90 cm high (*). It is advisable to use a 65 cm high vertical pipe. Make sure the drain hose is connected to the stand pipe at a slant.

Drain standpipe requirements:

•Minimum diameter of 5 cm

•Minimum carry-away capacity of 60 litres per minute

STEP 6  Turn on the washing machine

Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical outlet protected by a fuse or circuit breaker. Then, press the Power button to turn on the washing machine.

24  English

WD10J6410AX_DC68-03591V_EN.indd 24

2015/5/13 15:48:22