Crimestopper Security Products CS-2014DP-TW2-FM, CS-2900DP-FM Programmable Options, Passive Locks

Page 22

PROGRAMMABLE OPTIONS Cont.

4.ACTIVE RE-ARM:Active Re-arming allows the system to re-arm itself 30 seconds after disarmed with the transmitter if a door has not been opened. The status LED flashes rapidly during 30 second re-arm countdown. This is handy if the vehicle is accidentally disarmed without your knowledge.

5.PASSIVE LOCKS:

This option controls whether the doors will lock when Passive Arming occurs. Note: This may increase the risk of locking keys in the vehicle.

6. PARKING LIGHTS ON WITH DISARM:

Keeps parking lights on when system is disarmed to assist in locating and providing illumination near your vehicle when approaching at night for safety.

7. Data Port Protocol:

This option controls the Data Port Protocol for 1-Way (OFA modules) or 2-Way (SL modules). The default is set for 2-Way Protocol. This option has no effect on conventional wiring of Bypass modules.

8. Double Button Press for Remote start and Trunk release:

This option will allow you to change whether the Remote starter and Trunk release activate by a single ½ second press or a double button ½ second press.

9. SIREN CHIRPS WITH REMOTE START ACTIVATION:

This option controls whether the system gives 3 short siren chirps when engaging a remote start.

10. DISARM WITH TRUNK POP (AUX. OUTPUT 1):

Controls whether the system will or will not DISARM when the trunk pop or AUX. feature is used. When the feature is turned on the unit will DISARM when opening trunk or using an auxiliary device controlled by the Green/Red wire.

11. 10/60 Sec. OPEN DOOR WARNING:

This setting changes the delay time in which the alarm system begins to monitor the Door circuit. This option can prevent the alarm from giving warning chirps on vehicles with a delayed dome light.

22

Image 22
Contents Introduction DisclaimerTable of Contents PR PRE-INSTALLATION ConsiderationsComponent Mounting Green Mode B Optional Turbo Timer Input Wiring 9-PIN ConnectorGreen Mode a Start Activation Input Brown + Siren OutputNegative Auxilary Output +12V Constant Orange Negative Starter Disable/Anti-Grind Output Starter DisableWiring 3-PIN Connector Wiring 6-PIN High Current ConnectorIGN Green Door Pin Switch Input Wiring 5-PIN ConnectorViolet + Door Pin Switch Input Blue Hood/Trunk Pin Switch InputWiring 2-PIN LED / 2-PIN Program-Valet Button 22 gauge wires White +12V Brake ResetWiring 4-PIN Shock Sensor 22 Gauge wires Sensor AdjustmentBLUE/ORANGE Starter #3 Wire 4 PIN Output ConnectorYELLOW/BLACK OEM Rearm Output BLUE/ORANGE Starter VIOLET/WHITE AUXPower Door Locks Wiring & System Types RED +12V Coil Power for external relaysDoor Lock Wiring Separate DRIVER’S Door Unlock Wiring Negative Trigger Door LocksTachless Adjustment Tachless ModeImportant Notes Tach Finder Tach Mode & Tach Finder FeatureTach Finder Feature Tach ProgrammingTimed Crank Mode HOW to USE this FeatureProgrammable Options Diesel Glow Plug DelayTo Engage Option Programming Option Programming Table Engine Monitoring Second +1 SecondProgrammable Option Descriptions AUTOLOCK/UNLOCK W/IGNITIONParking Lights on with Disarm Programmable OptionsPassive Locks Siren Chirps with Remote Start ActivationLock DURING/AFTER Remote Start Door LOCK/UNLOCK Pulse TimeDouble Unlock Pulse No Option / not UsedULTRA-SMART Tachless Voltage Adjustment Diesel Glow Plug DelayFactory Horn Chirps / Pulses Option Reset Restore to Default Programmable Option ResetAux #4 Time control 1 sec. to 255 sec. Default = 12 seconds Programming Transceivers & TransmittersRemote Programming Diagram Vehicle Operation Vehicle #2 ControlAlarm Trigger Diagnostics Remote Start DiagnosticsJumper PIN Diagram Securing JumpersAntenna Diagram Wiring Diagram SelectData Port Diagram
Related manuals
Manual 32 pages 22.27 Kb