REMOTE PROGRAMMING DIAGRAM
1.Turn key to the ON position.( doors will lock if autolock is programmed )
2.Press Programming button 4 times, then after a few seconds the unit will flash the parking lights 4 times.
3.For CS2011DP systems: Press button #1 (Lock) of the transmitter; for 2-Way paging systems and “Sidekick” remotes: Press Buttons #1 & 2 together. You should get 2 light flashes indication the unit is waiting for a 2nd code, then press the same combination of buttons on a second remote, the unit will flash 3 times indicating its waiting for the 3rd code and lights will flash 4 times for 4th code. If all 4 codes are learned, the unit will automatically exit code-learning mode, otherwise turn key off and close hood.
NOTE: When learning 2-Way LCD or 2-Way LED remotes, wait for the confirmation beep or LCD “Antenna Icon” message before learning the next remote.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
2-WAY SYSTEMS & | |
"SideKick" REMOTES | ONE WAY CS-2011DP |
| IGN |
| OFF |
| FLASH 2, 3, or 4 X's |
LOCK & | COMPLETE |
PRESS |
UNLOCK | LOCK ONLY |
PRESS TOGETHER | |
