Heath Zenith 6107 manual Test For Correct Common Wire Connection

Page 6

INSTALLATION

Test For Correct Common Wire Connection:

Re-install the switch.

Turn the circuit breaker back on.

Leaving the jumpered switch in one position,

flip the other 3-way switch on and off.

Lights

Yes

Jumper is

turn on

correct. Go

and off.

to next page.

No

Move one end of the jumper

Flip the switch with the

wire to the previously

jumper wire to the

unconnected terminal.

other position.

Flip the unjumpered switch

Remove the jumpered

on and off.

switch from the

junction box.

Turn the power

No

Lights

Yes

Jumper is

off at the

turn on

correct. Go

circuit breaker.

and off.

to next page.

- -	595-4514-16

Image 6

Contents Motion Sensing Way Wall Switch Installation ONE 6107 Switch in Circuit Add Jumper At Remote 3-Way Switch Connect Jumper at the Remote SwitchReplace Other Switch Turn the power off at the circuit breakerTest For Correct Common Wire Connection Troubleshooting Wiring Connections Turn power off before rewiringSpecial Installations Installations, con- nect the wall switch as shown hereAdjustment Photo SensitivityInstall Wall Cover Plate Time ControlM E On When you want the light on all the time Using the Light ControlOff When you want the light off all the time OperationsTroubleshooting Auto mode, light does not stay on Technical ServiceNo Service Parts Available for this Product Auto mode, light turns on in daylightSpecifications Five Year Limited Warranty El Interruptor Tridireccional de pared y Dectector de Instalacion 18-595-4514-16 Conecte el Cable Conector en el Interruptor a Control Remoto Instale el Detector de Movimiento en el otro inte- rruptor Prueba para la conexión correcta de un cable común Conexiones de cableado para análisis de averías Apague la energia antes de reconectarInstalaciones Especiales Se muestra aquíAjuste Sensibilidad de FotoControl del Tiempo Instale la Tapa de ParedOff Cuando quiere que la luz esté siempre apagada FuncionamientoCómo usar el Control de Luz On Cuando quiere que la luz esté siempre prendidaLa luz no se apaga Investigacion DE AveriasLa luz no se prende El interruptor a control remoto no funcionaLa luz no se queda prendida cuando está en automático Servicio TécnicoLa luz no se prende cuando está en automático La luz se prende durante el día cuando está en auto- máticoEspecificaciones Hasta 400 Vatios Máximo Estabilizador de arranque rápidoGarantía Limitada a 5 Años 595-4514-16-31 Purchase Information Información de la compra