OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Stove Body
One Piece
Log Set
Inside
Stove
Cavity
ON | HI |
|
|
OFF |
|
| |
|
|
| O |
REMOTE | LO | NO | F |
| F | ||
|
| TOL IP | |
Piezo Ignitor | Selector | Control Knob | |
|
| Switch | Flame |
|
|
| |
Stove Door | Gas Log Heater |
| Adjustment |
(Shown in the |
| Knob | |
Base Assembly |
| ||
open position) |
|
| |
|
|
| |
Figure 1 - Typical Stove Cabinet Model (Shown with Model MSVFBPR Heater)
PRODUCT
FEATURES
OPERATION
This heater is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by realistic, dancing yellow flames. This heater is designed for
SAFETY PILOT
This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for
PIEZO IGNITION SYSTEM
This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.
LOCAL CODES
Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
105986 | 3 | For more information, visit www.desatech.com |