Smart install
Through Smart install function, installer can check if the installation was done properly.
If the installation was not done properly, error indicator will turn on the indoor unit display. Therefore user will know if the installation was done properly or not.
Checking the power consumption
This function will display the amount of electricity consumed by operating the air conditioner.
(You have to use the remote controller to check the power consumption but it will not be displayed on the remote controller display.)
Press the 2ndF button and then press the Usage button on the remote controller while the air conditioner is operating.
When the air conditioner is not in use, power consumption will not be displayed on the indoor unit display even if you press the 2ndF Usage button.
Indoor unit will display the amount of Power consumption for few seconds and then return to usual status by displaying the indoor temperature.
Power consumption will be calculated from the moment the air conditioner is turned on and calculated value will be reset when the air conditioner turns off.
0.1 is the default value of the electricity consumption and 99 is the maximum value. Unit is in kWh.
English-11
01 PREPARATION
A3050 TV_IB&IM_DB68-04043A-01_EN.indd 11
2014/8/15 15:44:23