![](/images/new-backgrounds/1281300/28130073x1.webp)
• Search for other spots if there are less than two studs, or the distance between the studs are different from the plate hanger.
•Fix the installation plate without inclining to one side.
•Make sure that a wall can withstand the weight of the product. If you install the product in a place where it is not
strong enough to withstand the product weight, the unit could fall and cause injury.
Assembling the hanger screw
Use 2 screws to fix the indoor unit with hanger plate as shown in the picture.
Screw
Disassembling/Assembling the Cover panel for indoor unit installation
Please scan
this QR code for detail video of indoor unit installation..
In order to install the indoor unit, you must disassemble the cover panel first.. Please proceed following instructions to disassemble and assemble the cover panel.. Hooks (on the cover panel) may get damaged if you apply excessive force as you disassemble and assemble the cover panel.. Please follow the following instructions..
Removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened with screws.. Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel..
Cap Screw
<Remove the Cap screw>
Cover Panel
<Unfasten the screw>
English-37
05 INSTALLATION
A3050 TV_IB&IM_DB68-04043A-01_EN.indd 37
2014/8/15 15:44:33