Quadra-Fire CB1200 Installing Logo Nickel Only, Charred Areas in the Back, Left Twig Right Twig

Page 20

CB 1200 Pellet Stove

R

F. Optional Log Set Placement Instructions

G. Optional Gold or Nickel Grille Assembly

CAUTION

Logs are FRAGILE. Use extreme care when handling or cleaning logs.

1.Place the front log in first as shown in Figure 20.1. Place log between firepot and face of appliance with charred area surrounding firepot.

2.Set the left and right twigs onto the log, placing the holes in the base of twigs over the locating pins in log. See Figure 20.2. Ensure that the charred ends are facing the firepot.

LOCATING PINS

Figure 20.1

CAUTION

Do not open top all the way back so the weight of the top is supported by the hinges. It will damage the hinges. It will be necessary to prop the top up with a supporting brace. You can use the shipping box as shown in Figure 1.

1.Remove grille from packaging.

2.Lift top up and place shipping box in vertically.

3.Place 1 flap of the box lid into opening for stability.

4.Align the 3 holes in the stove with the holes in the grille.

5.Use a Phillips screwdriver to secure in place.

6.Remove shipping box and lower top.

Align the 3 hoes in the stove with the holes in the grille and secure in place.

Place 1 flap of box lid into opening for stability

CAUTION: Do not open top all the way back so the weight is supported by the hinges. It will damage the hinges. Prop the top up with supporting brace or use shipping box as shown.

Figure 20.3

Charred Areas in the Back

H. Installing Logo (Nickel Only)

 

 

 

 

1.

Remove logo from packaging.

 

 

2.

The logo has 2 studs on the back.

Left Twig

Right Twig

3.

Install the logo on the lower left side of the center

 

 

 

panel by pressing the 2 studs into the pre-drilled

 

Front Log

 

holes. See Figure 20.4.

 

 

 

Figure 20.2

 

 

NOTE:

 

 

Due to the abrasive nature of a pellet appliance fire, the

 

logs are not covered under warranty. Any placement varia-

Install Logo

tion other than shown here can cause excessive heat and

shall void the appliance warranty.

 

Figure 20.4

 

 

Page 20

7014-082B

September 21, 2006

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Classic BAY 1200 Pellet Stove Behind left side curtain on outside of hopper wall Testing Lab & Report Number Serial Number Model Mfg DateCB 1200 Pellet Stove Table of Contents Listing and Code Approvals Design, Installation & Location Considerations Fire SafetyGetting Started Appliance LocationInspect Appliance & Components and Pre-Use Check List CB 1200 Pellet Stove Tools And Supplies NeededMeasuring Standards Dimensions and Clearances Appliance DimensionsCB 1200 Pellet Stove Clearances to Combustibles UL and ULC Hearth Pad Requirements Exception for Horizontal InstallationsCB 1200 Pellet Stove Hearth Pad Requirements UL and ULC Vent Information Pipe Selection Chart Level of this installation. See FigureCB 1200 Pellet Stove Equivalent Feet of Pipe Example of 3 Elbow-Rear Vent Termination Calculaton5Venting Systems AlcoveCB 1200 Pellet Stove Through The Wall Straight OutDegree CB 1200 Pellet Stove Vertical Through The Wall & VerticalMasonry Alternate MasonryMobile Home Outside Air Kit Instructions Rear Installation Floor InstallationAppliance Set-Up Installing the Top Vent Adapter CB 1200 Pellet Stove Top Vent Adapter InstallationRear Vent and Rear Vent to Top Vent Adapter Installation CB 1200 Pellet Stove Brick Set Installation Brick Clip InstallationInstalling Logo Nickel Only Charred Areas in the BackLeft Twig Right Twig Front Log Holes. See FigureDoor Installation CB 1200 Pellet Stove Thermostat InstallationTo install door To adjust latchesOperating Instructions Fuel Size And Material General Operating InformationStarting Your First Fire Fuel Adjustment RodFeed Rate Adjustment Instructions Frequently Asked Questions CB 1200 Pellet Stove Ignition CyclesPossible Cause Corrective Action TroubleshootingSymptom Page Page Maintaining & Servicing Your Appliance Cleaning Heat Exchanger Chambers Cleaning Beneath Heat ExchangerAsh Removal from Firebox Cont’d Disposal of Ashes Frequency As neededCleaning the Glass Frequency As needed Cleaning the HopperCleaning Exhaust Blower Requires No Lubrication Cleaning Convection Blower Requires No LubricationCB 1200 Pellet Stove High Ash Fuel Content Maintenance Convection Blower ReplacementRe-install blower to blower housing Exhaust Blower Replacement Remove existing blowerInstall new blower Screws Replacing Center GlassReplacing Side Glass Component Function & Location Reference MaterialsCB 200 Pellet Stove Vacuum Switch Wiring Harness See .1 belowSnap Disc #1 Convection Blower 145F Snap Disc #2 Thermostat Override 200FCB 1200 Pellet Stove Component Locations Glass Size Sides CB 1200 Pellet Stove Exploded ViewsGlass Size Center 13-7/8 wide x 11 high Nbr Description CB 1200 Pellet Stove CB 1200 Pellet Stove Service Parts and Accessories Item # Parts Alphabetical OrderAppliance Item # Service Parts Alphabetical OrderAccessories CB 1200 Pellet Stove Service And Maintenance Log Date of Service Performed By Description of ServiceLifetime Warranty CB 1200 Pellet Stove Warranty PolicyContact Information Telephone

CB1200 specifications

The Quadra-Fire CB1200 is a highly efficient and versatile wood-burning stove that stands out in the market for its innovative features and robust performance. With a focus on both functionality and aesthetics, the CB1200 aims to provide a comfortable, efficient heating solution while enhancing the beauty of any living space.

One of the main features of the Quadra-Fire CB1200 is its powerful heating capability. It boasts a maximum heat output of up to 80,000 BTUs, making it suitable for heating large areas within homes and cabins. The unit can efficiently heat spaces up to 2,500 square feet, offering reliable warmth even in the coldest climates. This impressive output is complemented by an extended burn time, allowing for longer periods between refueling, which adds convenience for users.

The CB1200 comes equipped with Quadra-Fire's renowned Advanced Combustion Technology. This cutting-edge system improves the efficiency of the fire by maximizing the combustion of gases and particles, leading to a cleaner burn with reduced emissions. This not only enhances the stove's overall performance but also provides a more environmentally friendly heating solution.

Another notable characteristic of the CB1200 is its user-friendly design. The large, glass door provides an excellent view of the fire, creating a warm and inviting ambiance while ensuring easy monitoring of fuel levels. The stove features a convenient ash pan for effortless cleanup, and the adjustable airflow control allows users to customize the burn intensity to suit their heating needs.

In addition to its performance features, the CB1200 is designed with durability in mind. Constructed from high-quality materials, it is built to withstand the rigors of regular use. The unit also offers various finishing options, enabling homeowners to select a style that complements their décor.

The Quadra-Fire CB1200 combines efficiency, beauty, and convenience, making it an exemplary choice for anyone seeking a wood-burning stove. With its impressive heating capabilities, advanced combustion technology, and user-friendly features, the CB1200 is designed to provide lasting comfort and satisfaction for its users, making it a worthwhile investment for any home.
Top Page Image Contents