15
3
5
LOG #5
1 6
3
6
LOG #6
F. Glass Assembly |
| |
| WARNING | GLASS |
| Handle glass doors with care. | |
| ASSEMBLY | |
| • Inspect the gasket to ensure it is undamaged. | PULL TO |
| • Inspect the glass for cracks, chips or scratches. | |
| • Do NOT strike, slam or scratch glass. | RELEASE |
| (LEFT SIDE | |
• | Do NOT operate appliance with glass door removed, | GLASS LATCH |
| cracked, broken or scratched. | |
|
| |
• | Replace glass door assembly as a complete appliance. |
|
Î Removing Glass Assembly |
| |
There are two glass latches on the left side of glass as- | Figure 11.2 Glass Assembly | |
sembly and two glass latches on the right side. |
| |
•To release glass assembly, pull latch forward and allow to retract away from glass assembly.
•Remove glass assembly after all four latches have been released (see Figure 11.2).
Replacing Glass Assembly
Replace the glass door on the appliance. Fasten the latches on the glass frame.
G. Air Shutter Setting
Optimal flame appearance is dependent on the air shutter setting. Adjustments should be made by a qualified technician.
| NG | LP |
Burner | 7/16 | Full Open |
24 |
|