ROCK WOOL INSTALLATION
1.Break rock wool into
2.Place rock evenly across rock wool tray and front burner as shown in Figure 18.
•Rock wool depth must not be more than 1".
•Do not place rock wool past the bend in rock wool tray.
•Do not place rock wool on rear burner.
WARNING
Rock wool must be placed correctly. Placing rock wool in wrong area will create high carbon monoxide.
Bend in Rock
Wool Tray
Rock Wool
Rock Wood
Tray
REMOTE | CONTROL |
|
PILOT
Figure 18 - Rock Wool Installation
OFF
FLAME APPEARANCE
Flames from the pilot, front and rear burner should be visually checked as soon as the heater is installed. In addition, periodically check the flames visually during operation.
CHECKING PILOT FLAME
The pilot flame must always be present when the heater is in operation. It should just touch the top of the ther- mocouple tip for natural. See Figure 19 for correct pilot flame.
If the pilot flame does not touch the thermocouple, then the burners cannot function reliably. See Figure 20 for incorrect shape of pilot flame.
Thermocouple | Thermocouple |
for Natural | for Natural |
Thermocouple | Thermocouple |
for LP | |
| for LP |
Figure 19 - Correct Appearance of Pilot Flame | Figure 20 - Incorrect Appearance of Pilot Flame |
20 | 58D6002 |