Monessen Hearth MJ27PR, MJ27NR Checking the Burner Flame, Operating Instructions

Page 29

CHECKING THE BURNER FLAME

In normal operation at full rate after 15 minutes, the following flame appearances should be observed:

LG551

Figure 33 - Correct Burner Flame Appearance

Burner will have a random pattern of yellow flames as shown in Figure 33. There should be glow- ing embers on the front burner. Note: The front flames and embers will be an opaque orange color during the burn off time.

OPERATING INSTRUCTIONS

Avoid any drafts that alter burner flame patterns. Do not allow fans to blow directly into the fireplace. Do not place a blower inside the burn area of the firebox. Ceiling fans may create drafts that alter flame patterns. Sooting and improper burning will result.

During manufacturing, fabricating and shipping, various components of this appliance are treated with certain oils, films or bonding agents. These chemicals are not harmful, but may produce annoying smoke and smells as they are burned off during the initial operation of the appliance, possibly causing headaches or eye or lung irritation. This is a normal and temporary occurrence.

The initial break-in operation should last four hours with the burner at the highest setting. Provide maximum ventilation by opening windows or doors to allow odors to dissipate. Any odors remain- ing after this initial break-in will be slight and will disappear with continued use.

This appliance must not be used with glass doors in the closed position. This can lead to pilot out- ages and severe sooting outside the fireplace. Refer to Page 10, Figure 3.

86D0024

29

Image 29
Contents Natural Gas or Liquid Propane Control Type Millivolt Hi/Low Models MJ27NR, MJ27PRContents Installer Important Safety InformationOwner Gas Code, Ansi Z223.l/NFPA54Known as wellhead gas Never connect unit to private nonUtility gas wells. This gas is commonly Make sure you have received all parts What you will need for installationGetting Started Product Features and Specifications Codes General Installation InformationAmerican National Standards Institute, Inc National Fire Protection Association, IncBTU / hr = Minimum Hearth Dimension Fireplace and Hearth DimensionsHeight of Restriction Minimum Depth of Fireplace/Firebox Placement in a fireplace with a restrictive barrierSidewall and Ceiling Clearances Clearances and Height RequirementsMeasurement MJ27 Requirements for Safe InstallationHeat Resistant Mantel, Shelf or Other Combustible Projection Heat Resistant Requirements for Safe Installation with Wood12 min Is an example of an unsafe mantel instal Minimum Clearance above Combustible Flooring Floor ClearancePaint by a qualified chimney cleaner Before installing in a solid fuel burningInstalling Vented Applications Fireplace PreparationPlacing and Securing Appliance Installing Vented ApplicationsAssembly procedure Gas Connection Connecting the GASMillivolt Valve Control Figure Checking GAS PressureAte Electrical Wiring MillivoltDo not allow wires Connecting Remote ReceiverBurner To touch grate orLOG Placement Install Log #8 Install Log #4 Place Flickering Bright Embers Place Flickering EmbersANDIRON Installation Andiron and rock installationAssembly Instructions Placing the decorative rockChecking the pilot flame Flame AppearanceOperating Instructions Checking the Burner FlameWhat to do if YOU Smell GAS Operating InstructionsTo Turn OFF GAS to Heater Cleaning and Servicing Operating Instructions / Cleaning and ServicingServicing. Only a qualified service person TroubleshootingShould service and repair the heater Turn appliance OFF and allow to cool beforeGoes out when control Description Qty Replacement partsDescription Qty MJ27 Replacement Parts listLogs Please Read and Follow These 86D0024 Five Year Warranty Lifetime WarrantyBasic Warranty If Warranty Service is NeededMhsc