Monessen Hearth MJ27NR, MJ27PR Operating Instructions, What to do if YOU Smell GAS

Page 30

OPERATING INSTRUCTIONS

for your safety read before lighting

warning

If you do not follow these instruction exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance is equipped with a piezo ignition device which lights the pilot. If piezo is not working properly see Match Lighting Instructions, Page 32.

B.BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS:

Do not attempt to light any appliance.

Do not touch any electric switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in, or turn the gas control knob. Never use tools.

If the knob will not push in or turn by hand, don't try to repair it. Call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part of it has been under water. Immediately call a qualified service technician to

inspect the appliance and

 

to replace any part of the

Pilot

control system and any

 

gas control that has been

 

under water.

On/Off/Pilot Knob

FP2016

Remote Receiver

Figure 34 - Location of Piezo Ignitor, Control Knobs and Switch

30

86D0024

Image 30
Contents Models MJ27NR, MJ27PR Natural Gas or Liquid Propane Control Type Millivolt Hi/LowContents Owner Important Safety InformationInstaller Gas Code, Ansi Z223.l/NFPA54Never connect unit to private non Utility gas wells. This gas is commonlyKnown as wellhead gas What you will need for installation Getting StartedMake sure you have received all parts Product Features and Specifications American National Standards Institute, Inc General Installation InformationCodes National Fire Protection Association, IncBTU / hr = Fireplace and Hearth Dimensions Minimum Hearth DimensionPlacement in a fireplace with a restrictive barrier Height of Restriction Minimum Depth of Fireplace/FireboxClearances and Height Requirements Sidewall and Ceiling ClearancesRequirements for Safe Installation Heat ResistantMeasurement MJ27 Heat Resistant Requirements for Safe Installation with Wood Mantel, Shelf or Other Combustible Projection12 min Is an example of an unsafe mantel instal Floor Clearance Minimum Clearance above Combustible FlooringInstalling Vented Applications Before installing in a solid fuel burningPaint by a qualified chimney cleaner Fireplace PreparationInstalling Vented Applications Assembly procedurePlacing and Securing Appliance Connecting the GAS Gas ConnectionChecking GAS Pressure Millivolt Valve Control FigureElectrical Wiring Millivolt AteBurner Connecting Remote ReceiverDo not allow wires To touch grate orLOG Placement Install Log #8 Install Log #4 Place Flickering Embers Place Flickering Bright EmbersAssembly Instructions Andiron and rock installationANDIRON Installation Placing the decorative rockFlame Appearance Checking the pilot flameChecking the Burner Flame Operating InstructionsOperating Instructions What to do if YOU Smell GASTo Turn OFF GAS to Heater Operating Instructions / Cleaning and Servicing Cleaning and ServicingShould service and repair the heater TroubleshootingServicing. Only a qualified service person Turn appliance OFF and allow to cool beforeGoes out when control Replacement parts Description QtyReplacement Parts list LogsDescription Qty MJ27 Please Read and Follow These 86D0024 Basic Warranty Lifetime WarrantyFive Year Warranty If Warranty Service is NeededMhsc