Monessen Hearth 36CDVXTRN Optional Accessories Available, Fan Kits, Wiring Instructions

Page 39

CDVX Series Direct Vent Gas Fireplace

Optional Accessories Available

Fan Kits

FK12

This auxiliary fan system increases the efficiency of the circulation of the heating air.

The FK12 Fan Assembly is a fixed speed fan system and does not allow for variable speed control.

Specifications

115 Volts / 60 Hz / 56 Watts.

Maintenance

The fan itself does not require regular maintenance, however periodic cleaning of the fan and the surrounding area is required.

Check the area under the control door (lower louvre assembly) and in front of the fan and wipe or vacuum this area at least once a month during the operating season.

Installation

The fan assembly is supplied fully wired eliminating the need for a licensed electrician to carry out the installation.

1.Remove the lower Louvre assembly. Move the fan & bracket assembly around the gas valve and lines to locate the unit against the back wall of the appliance, resting on the base.

2.With the protective cover removed from the self- adhesive ‘Velcro’ strips apply mild pressure to the fan & bracket unit to secure the strips to the metal panels. No further securing is required.

3.Power to the fan can be supplied by plugging the supplied lead into a conveniently located wall socket or by using the receptacle in the bottom of the unit.

 

Fan

 

Receptacle

 

Valve

FP1602

Gas Lines

 

Fig. 76

FK12 fan placement.

Wiring Instructions

The fireplace, when installed, must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electric Code.

For USA installations follow the local codes and the national electrical code ANSI/NFPA No. 70.

Should this fan require servicing or repair the power supply must be disconnected.

Any electrical rewiring of this fan must be done by a licensed electrician.

Remote Controls

Optional remote control units are available to control different functions of the appliances.

Model

Function/s Controlled

RCI

ON/OFF

RC2

ON/OFF and Temperature

IMTFK

Wall mounted thermostat control

(must be used in bedroom installations)

Optional Trim

The Perimeter trim is designed to enhance the look of the fireplace.

Model

Description

36CDVTK

Perimeter Trim Black

20012253

39

Image 39
Contents Builder Direct Vent Models Table of Contents Certified To Installation & Operating InstructionsGas Equipment Venting System not Provided Requirements for the Commonwealth of MassachusettsFireplace specifications and framing dimensions Fireplace Dimensions Rear Vent1756 203 mm 435 mm 166 422 mm Fireplace Dimensions Top VentMantels Mantel ChartLocating Your Fireplace Clearance to CombustiblesFinal Finishing Hood InstallationHearth Framing and FinishingGas Inlet and Manifold Pressures Gas SpecificationsGas Line Installation Remote ON/OFF SwitchLocation of Vent Termination General Venting120V Electrical Hook Up There must not be any obstruction such as bushesGeneral Venting Information Termination Location Canadian Installations1 US Installations2Flex Vent Pipes Canadian InstallationsUSA Installations General Information Assembling Vent PipesExample B How to Use the Vent Graph36CDVXR Venting Example aStep Rear Wall Installation Twist Lock PipeSide view of final unit location Rear Wall Vent Application 7TCD45KTMaximum number of 90 elbows is three Vertical Sidewall ApplicationsMaximum number of elbows Vertical Sidewall Installation7TDVSNORK Below Grade InstallationVertical Through-the-Roof Applications Vertical Through-the-Roof InstallationPlace firestop spacers and secure Enlarged ends of the vent section always face down. FigCdvxt Top Vent Baffle 36CDVXT Vertical VentingVertical Sidewall Installations Vertical height requirement Always install horizontal venting on a level planeApply high temperature sealant to collars or termina- tions Below Grade InstallationsMax 3m Min 610 mm Venting Components Glass Information Glass CleaningWindow Frame Assembly Removal Operating InstructionsRN/RP & EN/EP Models Flame & Temperature AdjustmentFlame Characteristics LogsTo Turn Off Gas to Fireplace Lighting and Operating InstructionsLighting Instructions Turning Off the Gas to the ApplianceValve in the on position Troubleshooting the Gas Control System Pilot Conversion Fuel Conversion InstructionsTesting for Leaks Pilot Flame AdjustmentReassembly Maintenance Cleaning the Standing Pilot Control SystemBurner and Burner Compartment 6a,b 14a,b DescriptionFuel Conversion Kits CdvxFan Kits Optional Accessories AvailableWiring Instructions Remote ControlsCdvx Series Direct Vent Gas Fireplace Cdvx Series Direct Vent Gas Fireplace Cdvx Series Direct Vent Gas Fireplace Lifetime Warranty Five Year WarrantyBasic Warranty Fan-OFF Fan-ON Efficiency Ratings

36CDVXTRN specifications

The Monessen Hearth 36CDVXTRN is a distinguished choice in the world of gas fireplaces, seamlessly blending aesthetics with cutting-edge technology. Designed to provide ample warmth while enhancing the ambiance of any room, this unit embodies the perfect fusion of form and function.

At the heart of the Monessen Hearth 36CDVXTRN is its impressive 36-inch width, providing a generous viewing area for the mesmerizing flames. The glass front offers an unobstructed view, creating a stunning focal point in any living space. With a contemporary design and realistic log set, this fireplace captures the essence of a traditional wood-burning fire without the hassle of logs or ash cleanup.

One of the standout features of the 36CDVXTRN is its advanced burner technology. The fireplace utilizes a dual burner system to create a realistic flame that rises and dances, mimicking the natural motion of a wood fire. This not only adds to the aesthetic appeal but also ensures a consistent and efficient heat output. The unit boasts an exceptional heat output of up to 33,000 BTUs, making it suitable for heating larger areas while maintaining efficiency.

The Monessen Hearth 36CDVXTRN is engineered with user convenience in mind. It comes equipped with a remote control, allowing users to easily adjust settings from the comfort of their seat. The IntelliFire® ignition system adds another layer of convenience, offering a reliable and efficient ignition process. This innovative technology ensures safe operation and quick lighting, eliminating the need for matches or lighters.

Safety is a top priority with the Monessen Hearth 36CDVXTRN. The fireplace includes a sealed combustion chamber, preventing any harmful gases from entering the home. Additionally, the unit features a standard safety shut-off, which automatically turns off the gas supply in case of a malfunction, providing peace of mind for families.

Installation is straightforward with the Monessen Hearth 36CDVXTRN, as it is designed for either vented or vent-free configurations. This versatility allows homeowners to select the best option for their specific needs and preferences. Furthermore, the unit is compatible with various decorative options, from traditional mantels to modern finishes, allowing for complete customization to fit any interior style.

Overall, the Monessen Hearth 36CDVXTRN stands out as a premium gas fireplace solution, offering exceptional heat output, user-friendly features, and an elegant design. Its blend of modern technology and traditional aesthetics makes it an ideal choice for those looking to enhance their living space while enjoying the comforts of a captivating fire. Whether used for warmth or as a centerpiece of relaxation, the Monessen Hearth 36CDVXTRN is a testament to quality and sophistication in home heating solutions.