19
FINISHING
GLASS DOOR INSTALLATION |
| CAST FRONT INSTALLATION |
AND REMOVAL |
| AND REMOVAL |
|
|
|
1.Lift the top cast piece off of the unit.
2.Detach the front cast piece from the side pieces by re- moving the screws from the brackets located in the upper inside corners.
3.Slide the front straight up to remove.
| 3 | |
DOOR | 2 | |
LATCHES | ||
|
FIGURE 30
SWITCH FUNCTIONS
MAIN ACCENT
BURNER LIGHT
1.Lift the top cast piece off of the unit.
2.Unlatch the door latches from the door.
3.Slide the door straight up to remove.
2
3 SCREWS
BRACKET
FRONT
FIGURE 31
Follow the above steps in reverse in order to reinstall the door. Ensure that the bottom of the door meets the door retainer before closing the latches.
Follow the above steps in reverse in order to reinstall the cast front. Ensure that the tabs on the underside of
FAN
SWITCH SWITCH
the front fit behind the front legs.
CONTROL
Note: It is not necessary to remove the cast front, in order to remove the door.
FIGURE 32
FRONT
TAB
DOOR
RETAINER 
FRONT