Vermont Casting Encore NC 1450 Cutaway perspective of acolve installation

Page 14

Encore 1450 Non-Catalytic Woodburning Stove

ST504

Fig. 19 Cutaway perspective of acolve installation.

Existing Combus-

Ceiling sup- port package extends 2” below Durock® (or equivalent) ceiling

1” air gap, top and bot- tom, on both sides and back wall

NOTE: From 60” to 63” must be covered by a noncombus- tible material.

60" Min.

63" to Alcove Ceiling

ST506

	tible Framing	21��"
		21��"
		12"
	Metal studs	Min.
	support 7/16”
	Durock® (or	36"
	equivalent)	36"
	equivalent)	Max.
	ceiling	Max.
	14��"
	43" Min.	ST505

Fig. 20 Reﬂected ceiling plan.

Fig. 21 Front Section; 63” min. clearance from ﬁnished ﬂoor surface to combustibles on front face. Combustible facing may overlap metal studs by only 1”. It should not extend be- low the height of the noncombustible ceiling.

14

30002425

Image 14

Contents Encore Table of Contents WelcomeEncore dimensions SpeciﬁcationsChimney Height InstallationOutside Air Prefabricated Chimneys What Kind of Chimney to UseMasonry Chimneys Chimney SizeDouble-wall Chimney Connectors Chimney Connector GuidelinesSingle-wall Chimney Connectors Fireplace Installations Securing the Single-wall Connector to a Masonry ChimneyFreestanding Installations Above the FireplaceThrough the Fireplace Wall Pass-ThroughsFloor Protection An approved wall pass-through for the United StatesFloor Protection for Fireplace Installations CanadaWall Shields Keep the Stove a Safe Distance From Surrounding MaterialsReducing Clearances Safely with Shields Chimney Connector Heat Shields Fireplace Mantel and Trim ShieldsAlcove Installations Construction RequirementsCutaway perspective of acolve installation Encore NC Clearance Chart Unprotected Surfaces Protected SurfacesEncore Clearance Diagrams BcefWall Shield Requirements for Common Installations Corner Parallel Installations Assembly Fan Kit Installation Fan installation Kit #Single Air Control Regulates Heat Output and Burn Time OperationEncore NC Controls Damper Directs Air Flow Within the StoveBurn Only High-Quality Wood Infrared Reﬂective Glass Panels For Clear Fire ViewingAndirons Help Protect the Glass Starting and Maintaining a Wood Fire Use the Air Control Settings That Work Best for YouConditioning Your Stove Refuel While the Embers Are Still Hot Add larger pieces of wood as the ﬁre begins to burn wellAsh Removal and Disposal Draft Management Fuel Draft TestingCreosote Back-pufﬁngMaintenance Replace the Stove Gaskets as Needed Adjust the Door LatchesTighten the Damper Handle as Needed Chimney System Creosote Adjust the Door If NecessaryAll Gasketed Construction Maintenance Schedule Stove Chimney ConnectorEncore Non-Catalytic Woodburning Stove Encore Woodburning Stove Shell Enamel Parts Encore NC Model Limited Lifetime Warranty CFM Corporation