Vermont Casting Encore NC 1450 installation instructions Welcome, Table of Contents

Page 2

Encore 1450 Non-Catalytic Woodburning Stove

Welcome

Congratulations on your choice of a Vermont Castings Encore. With this purchase you have made a commitment to make the hearth a place of warmth, beauty, and comfort in your home. At CFM Corporation, we share that joy and appreciation for the hearth. You may be assured that your cast-iron Vermont Castings stove has been made with the utmost care and will provide you with many years of service.

As you become acquainted with your new stove or fireplace, you will find that its visual appearance is matched by its func- tionality, due to cast iron’s unique capability to absorb and radiate heat.

Also, CFM Corporation units are among the cleanest-burning wood stoves and fireplaces available today. As an owner of a Vermont Castings stove, you make a strong statement for pollution-free energy. Clean burning, however, depends on both the manufacturer and the operator. Please read this manual carefully to understand how to properly operate and maintain your stove or fireplace.

At CFM Corporation, we are equally committed to your satisfaction as a customer. That is why we maintain an exclusive network of the finest dealers in the industry. Our dealers are chosen for their expertise and dedication to customer service. They are factory-trained and knowledgeable about every CFM Corporation product. Feel free to contact your Authorized Vermont Castings Dealer anytime you have a particular question about your stove or its performance.

This manual contains valuable instructions on the installation and operation of your Vermont Castings stove. It also contains useful information on maintenance and assembly of this product. We urge you to read the manual thoroughly and to keep it as a reference.

Sincerely,

All of us at CFM Corporation

This manual describes the installation, operation, and maintenance of the Vermont Castings Encore Model 1450 non-catalytic wood burning heater. This heater meets the U.S. Environmental Protection Agency’s emission limits for wood heaters sold on or after July 1, 1990. Under specific test conditions this heater has been shown to deliver heat at rates ranging from 10,600 to 24,050 Btu/hr.

The Encore Model 1450 has been tested and is safety listed by OMNI-Test Laboratories of Beaverton, Oregon. The test standards are ANSI/UL-1482 and ANSI/UL-737 for the United States, and ULC S627. The Encore is listed for burning wood. Do not burn other fuels.

The Encore is listed and approved for use in mobile homes in the United States and Canada when installed with Vermont Castings Mobile Home Kit. Refer to and follow the instructions included with the mobile home kit (#0336) to ensure safe installation.

We recommend that you hire a professional installer certi- fied by the Wood Heat Education and Research Founda- tion (WHERF) or the Wood Energy Technical Training (WETT) to install your stove, or to advise you on the instal- lation should you attempt to install it yourself.

Please read this entire manual before you install and use your new stove. Failure to follow instructions may result in property damage, bodily injury, or even death.

Proposition 65 Warning: Fuels used in gas, wood- burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth de- fects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Accessories

Warming Shelves

 

 

#0200

Classic Black

#0205

Biscuit

#0201

Bordeaux

#0206

Chestnut Brown

#0202

Sand

#0207

Ebony

#0203

Midnight Blue

#0209

Vt. Classic Green

#0204

Suede Brown

 

 

#0127 Sparkscreen

#0171 Horizontal Collar Heat Shield

#0174 Vertical Collar Heat Shield

#3265 Outside Air Kit

#0336 Mobile Home Kit

#2767 Variable Speed Fan Kit

#0168 - 0169 Heat Shields for the Chimney Connec- tor

- Matching Porcelain Stovepipe - Matching 6” Flue Collar

Table of Contents

Specifications

3

Installation

4

Assembly

18

Operation

20

Maintenance

27

Replacement Parts

31

Warranty

35

2

30002425

Image 2
Contents Encore Table of Contents WelcomeEncore dimensions SpecificationsChimney Height InstallationOutside Air Prefabricated Chimneys What Kind of Chimney to UseMasonry Chimneys Chimney SizeDouble-wall Chimney Connectors Chimney Connector GuidelinesSingle-wall Chimney Connectors Fireplace Installations Securing the Single-wall Connector to a Masonry ChimneyFreestanding Installations Above the FireplaceThrough the Fireplace Wall Pass-ThroughsFloor Protection An approved wall pass-through for the United StatesFloor Protection for Fireplace Installations CanadaWall Shields Keep the Stove a Safe Distance From Surrounding MaterialsReducing Clearances Safely with Shields Chimney Connector Heat Shields Fireplace Mantel and Trim ShieldsAlcove Installations Construction RequirementsCutaway perspective of acolve installation Encore NC Clearance Chart Unprotected Surfaces Protected SurfacesEncore Clearance Diagrams BcefWall Shield Requirements for Common Installations Corner Parallel Installations Assembly Fan Kit Installation Fan installation Kit #Single Air Control Regulates Heat Output and Burn Time OperationEncore NC Controls Damper Directs Air Flow Within the StoveBurn Only High-Quality Wood Infrared Reflective Glass Panels For Clear Fire ViewingAndirons Help Protect the Glass Starting and Maintaining a Wood Fire Use the Air Control Settings That Work Best for YouConditioning Your Stove Refuel While the Embers Are Still Hot Add larger pieces of wood as the fire begins to burn wellAsh Removal and Disposal Draft Management Fuel Draft TestingCreosote Back-puffingMaintenance Replace the Stove Gaskets as Needed Adjust the Door LatchesTighten the Damper Handle as Needed Chimney System Creosote Adjust the Door If NecessaryAll Gasketed Construction Maintenance Schedule Stove Chimney ConnectorEncore Non-Catalytic Woodburning Stove Encore Woodburning Stove Shell Enamel Parts Encore NC Model Limited Lifetime Warranty CFM Corporation