Vanguard Heating VSGF28NTC, VSGF28NVA installation manual Installing Logs, Installing Front Log #1

Page 13

OWNER’S MANUAL

INSTALLATION

Continued

INSTALLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

CAUTION: Do not remove the metal data plates attached to the heater base assembly. The data plates contain important warranty information.

Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

1.Place front log (#1) on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 22). Push back of log flush with metal grate bar.

2.Rest middle log (#2) behind metal posts on front burner. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Figure 23).

3.Slide the grooves in the back of the rear log (#3) against the rear grate prongs. Make sure the peg on the log is on top (see Figure 24).

4.Place the crossover log (#4) on the rear log and the middle log. Make sure the peg on the rear log is in the hole in the bottom of the crossover log. The cross- over log should fit in the cutout of the middle log (see Figure 25).

5.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 26).

WARNING: You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.

Front Log (#1)

Notch

Grate

Prongs

Metal Grate Bar

Figure 22 - Installing Front Log (#1)

Middle Log (#2)

Groove

Metal

Post

Groove

Grate

Metal Post

Figure 23 - Installing Middle Log (#2)

Groove

 

in Back

Peg

of Log

Rear Log

Grate Prong

(#3)

 

Rear

Groove

Burner

 

in Back

 

of Log

 

Grate

 

Prong

Figure 24 - Installing Rear Log (#3)

Crossover

Log (#4)

CutoutHole

Peg

Figure 25 - Installing Crossover Log (#5)

Notches

Screws for

Mounting

Screen

Figure 26 - Installing Fireplace Screen

107157

13

For more information, visit www.desatech.com

Image 13
Contents VSGF28NVA OWNER’S Operation and Installation ManualVSGF28NTC What to do if YOU Smell GASUnvented Natural GAS Fireplace Safety InformationLocal Codes Product IdentificationUnpacking AIR for Combustion and Ventilation Product FeaturesDetermining FRESH-AIR Flow for Fireplace Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Installing Hood InstallationCheck GAS Type Electrical HookupConventional Fireplace Installation Installation ClearancesActual Framing Height 32 3/8 Front Width Depth BUILT-IN Fireplace InstallationInstallation Installing GAS Piping toInstallation Items Needed Fireplace LocationPipe Nipple Cap Tee Joint Sediment Trap Connecting Fireplace to GAS SupplyPressure Testing Fireplace Gas Connections Pressure Testing Gas Supply Piping SystemChecking GAS Connections Installing Front Log #1 Installing LogsOperating Fireplace For Your Safety Read Before LightingLighting Instructions Thermostat-Controlled ModelsTo Turn OFF GAS To Appliance Manual Lighting ProcedureThermostat Control Operation Variable Control Operation Blower Operation Model VSGF28NTC Inspecting BurnersModel VSGF28NVA Pilot Flame PatternCleaning Burner Injector Holder and Pilot AIR Inlet Hole Cleaning and MaintenanceFront Burner Flame Pattern LogsObserved Problem Possible Cause Remedy TroubleshootingMaintenance, Gas leak. See Warning statement Replacement Parts Technical ServiceService Hints Wiring DiagramCleaning KIT CCK Brass Trim Accessory GA6090Slim Hearth Base Equipment Shutoff Valve GA5010Illustrated Parts Breakdown KEY Part Number Description QTY Parts ListFireplace VSGF28NVA Illustrated PARTS7 BreakdownParts List LOG Base Assembly THERMOSTAT- Controlled Model VSGF28NTC Parts List Fireplace VSGF28NTC Parts List Warranty Information