Empire Comfort Systems VFSM-30-3 Combustible Material, Fireplace Preparation

Page 9

COMBUSTIBLE MATERIAL

Do not attach combustible material to the mantel of your fireplace. This is a fire hazard.

No greeting card, stockings or ornamentation of any type should be placed on or attached to the fireplace. This is a heating appliance. The flow of heat can ignite combustibles.

Figure 7

Figure 8

FIREPLACE PREPARATION

•Turn off gas supply to fireplace or firebox.

•Have the fireplace floor and chimney professionally cleaned to remove ashes, soot, creosote or other obstructions.

Have this cleaning performed annually after installation.

•Seal any fresh air vents or ash clean-out doors located on floor or wall

of fireplace. If not, drafting may cause pilot

outage or sooting. Use a heat-resistant sealant. Do not seal chimney flue damper.

Install and operate the appliance as directed in this manual.

FOR FACTORY BUILT FIREPLACES

FREE OPENING AREA OF CHIMNEY DAMPER FOR VENTING COMBUSTION PRODUCTS FROM DECORATIVEAPPLIANCES FOR INSTALLATION IN SOLID FUEL BURNING FIREPLACES

 

Appliance Input Rate (BTU/hr)

 

20

 

30

 

40

Chimney

 

Minimum Opening** (sq. in.)

 

Height* (ft)

 

 

 

 

 

 

 

10

11.3

 

16.6

 

22.1

15

8.6

 

12.6

 

17.3

20

7.5

 

10.8

 

14.5

25

6.6

 

9.6

 

12.6

30

6.2

 

9.1

 

11.3

35

5.7

 

8.0

 

10.8

40

5.3

 

7.5

 

10.2

*Height is from hearth to top of chimney and the minimum height is 10 feet.

**Chart shows minimum opening (sq. in.) for given height and input rate.

18954-2-0107

FOR MASONRY BUILT FIREPLACES

FREE OPENING AREA OF CHIMNEY DAMPER FOR VENTING COMBUSTIONPRODUCTSFROMDECORATIVEAPPPLIANCES FOR INSTALLATION IN SOLID FUEL BURNING FIREPLACES

 

Appliance Input Rate (BTU/hr)

 

20

 

30

40

Chimney

 

Minimum Opening** (sq. in.)

Height* (ft)

 

 

 

 

 

6

17.6

 

25.7

33.8

8

16.5

 

23.7

31.2

10

15.1

 

21.7

28.7

15

14.1

 

19.9

26.1

20

12.9

 

18.5

23.7

30

12.2

 

16.9

21.6

*Height is from hearth to top of chimney and the minimum height is 6 feet.

**Chart shows minimum opening (sq. in.) for given height and input rate.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Millivolt Variable Manual Installation InstructionsTable of Contents Do not Tamper with Pilot Light Safety Important Safety InformationCarbon Monoxide Poisoning MAY Lead to DeathLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction New InstallationGeneral Information Before you get startedMake sure you have received all parts Glass Doors ClearancesClearances Fireplace Preparation Combustible MaterialInstalling AS a Vented Appliance Before Fully Installing the ApplianceInstalling Damper Clamp Figure Pressure Testing of the Gas Supply System Installing a New Main Gas CockGAS Supply Recommended Gas Pipe DiameterOperation INSTRUCTIONS/FLAME Appearance Placement of Glowing Embers and Lava RockPlacing Lava Rock in Front of Burner on Fireplace Floor Variable Figure Millivolt Figure Manual FigureWhat to do if YOU Smell GAS VFSR-16,18,24,30 Lighting InstructionsLighting Instructions VFSM-18,24,30 Lighting Instructions Vfsr Pilot Pilot Flame CharacteristicsVfsv and Vfsm Pilot Correct Pilot Flame Pattern Incorrect Pilot Flame PatternTurn OFF Heater and Allow to Cool Before Cleaning Cleaning and ServicingWiring VfsrVfsv Heater produces a whistling noise when main burner is lit Gas odor even when control knob is in OFF positionNew Installation Appliance produces unwanted odorsIndex Part Description Parts ListParts View HOW to Order Repair Parts Service Notes Service Notes

VFSM-30-3 specifications

The Empire Comfort Systems VFSM-30-3 is a state-of-the-art vent-free gas fireplace that combines functionality with aesthetic appeal. Ideal for homes without traditional venting systems, this fireplace brings warmth and a cozy ambiance to any space while maintaining an efficient energy usage standard.

One of the main features of the VFSM-30-3 is its impressive heat output. With a heating capacity of up to 30,000 BTUs, it effectively warms areas up to 1,200 square feet, making it suitable for both small and large living spaces. The unit’s design incorporates a durable steel construction, ensuring longevity and resistance to wear over time.

The versatility of the Empire VFSM-30-3 is notable, as it can be powered by either natural gas or propane, allowing homeowners flexibility in fuel choice. It also features an adjustable flame height, giving users the option to create their desired level of warmth and ambiance. This is complemented by its realistic log set, which enhances the visual appeal, replicating the look of a traditional wood-burning fireplace.

Another significant characteristic of the VFSM-30-3 is its advanced vent-free technology. This innovative system allows for efficient combustion without the need for a chimney or flue, greatly reducing installation costs and complexities. The vent-free design also ensures that 100% of the heat generated is utilized within the room, providing exceptional energy efficiency.

Safety is a top priority with the Empire VFSM-30-3. The fireplace comes equipped with an oxygen depletion sensor, which automatically shuts off the gas supply if the oxygen levels fall below a safe threshold, providing peace of mind for users.

Installation of the VFSM-30-3 is straightforward, with options for wall mounting or placing it on a hearth. This flexibility allows homeowners to integrate the fireplace into their existing décor seamlessly. Its variety of trim options and finishes further empowers users to personalize their fireplace, ensuring it complements their home’s interior design.

In summary, the Empire Comfort Systems VFSM-30-3 offers a reliable and stylish heating solution for those seeking the charm of a gas fireplace without the challenges of traditional venting. Its combination of efficiency, safety features, and customizable options makes it a remarkable choice for any home.
Top Page Image Contents