Empire Comfort Systems VFSM-30-3 installation instructions Installation Instructions

Page 1

INSTALLATION INSTRUCTIONS

AND OWNER'S MANUAL

Vented/Vent-Free Burner

This appliance may be installed in an aftermarket permanentlylocated,manufactured(mobile)home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

WARNING: If the information in these instruc- tions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

—Do not store or use gasoline or other flamma- ble vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas suppli- er’s instructions.

•If you cannot reach your gas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

UNVENTED GAS LOG HEATER OR VENTED DECORATIVE APPLIANCE

MODELS

MILLIVOLT

VARIABLE

MANUAL

VFSR-16-3

VFSV-16-3

 

VFSR-18-3

VFSV-18-3

VFSM-18-3

VFSR-24-3

VFSV-24-3

VFSM-24-3

VFSR-30-3

VFSV-30-3

VFSM-30-3

EFFECTIVE DATE

JANUARY 2007

Installer: Leave this manual with the appli- ance.

Consumer:Retain this manual for future refer- ence.

This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions foradequate combustion and ventilation air must be provided. Refer to page 7.

WARNING: If not installed, operated and main- tained in accordance with the manufacturer's instructions, this product could expose you to substances in fuel or from fuel combustion which can cause death or serious illness.

WATERVAPOR:ABY-PRODUCTOFUNVENTED ROOM HEATERS

Water vapor is a by-product of gas combustion.An unvented room heaterproduces approximately one

(1)ounce (30ml) of water for every 1,000 BTU's (.3KW's) of gas input per hour. Refer to page 6.

18954-2-0107

Page 1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Millivolt Variable Manual Installation InstructionsTable of Contents Do not Tamper with Pilot Light Safety Important Safety InformationCarbon Monoxide Poisoning MAY Lead to DeathLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction New InstallationBefore you get started General InformationMake sure you have received all parts Glass Doors ClearancesClearances Fireplace Preparation Combustible MaterialBefore Fully Installing the Appliance Installing AS a Vented ApplianceInstalling Damper Clamp Figure Pressure Testing of the Gas Supply System Installing a New Main Gas CockGAS Supply Recommended Gas Pipe DiameterOperation INSTRUCTIONS/FLAME Appearance Placement of Glowing Embers and Lava RockPlacing Lava Rock in Front of Burner on Fireplace Floor Variable Figure Millivolt Figure Manual FigureWhat to do if YOU Smell GAS VFSR-16,18,24,30 Lighting InstructionsLighting Instructions VFSM-18,24,30 Lighting Instructions Vfsr Pilot Pilot Flame CharacteristicsVfsv and Vfsm Pilot Correct Pilot Flame Pattern Incorrect Pilot Flame PatternTurn OFF Heater and Allow to Cool Before Cleaning Cleaning and ServicingVfsr WiringVfsv Heater produces a whistling noise when main burner is lit Gas odor even when control knob is in OFF positionNew Installation Appliance produces unwanted odorsIndex Part Description Parts ListParts View HOW to Order Repair Parts Service Notes Service Notes

VFSM-30-3 specifications

The Empire Comfort Systems VFSM-30-3 is a state-of-the-art vent-free gas fireplace that combines functionality with aesthetic appeal. Ideal for homes without traditional venting systems, this fireplace brings warmth and a cozy ambiance to any space while maintaining an efficient energy usage standard.

One of the main features of the VFSM-30-3 is its impressive heat output. With a heating capacity of up to 30,000 BTUs, it effectively warms areas up to 1,200 square feet, making it suitable for both small and large living spaces. The unit’s design incorporates a durable steel construction, ensuring longevity and resistance to wear over time.

The versatility of the Empire VFSM-30-3 is notable, as it can be powered by either natural gas or propane, allowing homeowners flexibility in fuel choice. It also features an adjustable flame height, giving users the option to create their desired level of warmth and ambiance. This is complemented by its realistic log set, which enhances the visual appeal, replicating the look of a traditional wood-burning fireplace.

Another significant characteristic of the VFSM-30-3 is its advanced vent-free technology. This innovative system allows for efficient combustion without the need for a chimney or flue, greatly reducing installation costs and complexities. The vent-free design also ensures that 100% of the heat generated is utilized within the room, providing exceptional energy efficiency.

Safety is a top priority with the Empire VFSM-30-3. The fireplace comes equipped with an oxygen depletion sensor, which automatically shuts off the gas supply if the oxygen levels fall below a safe threshold, providing peace of mind for users.

Installation of the VFSM-30-3 is straightforward, with options for wall mounting or placing it on a hearth. This flexibility allows homeowners to integrate the fireplace into their existing décor seamlessly. Its variety of trim options and finishes further empowers users to personalize their fireplace, ensuring it complements their home’s interior design.

In summary, the Empire Comfort Systems VFSM-30-3 offers a reliable and stylish heating solution for those seeking the charm of a gas fireplace without the challenges of traditional venting. Its combination of efficiency, safety features, and customizable options makes it a remarkable choice for any home.
Top Page Image Contents