Empire Comfort Systems VFSM-30-3 installation instructions Clearances

Page 8

CLEARANCES (continued)

Sidewall & Ceiling Clearances (Figure 3)

18", 24", 30"

Log

41"

16"

Log

36"

Figure 3

The sides of the fireplace opening must be 6" from any combustible wall. The ceiling must be at least 36" (for the 16" log) and 41" (for 18", 24" and 30" logs) from the fireplace opening.

Mantel Clearances Without Hood (Figure 4)

You must have non-combustible materials above the fireplace opening. Non-combustible material must extend at least 12" above fireplace opening. With sheet metal, you must have non-combustible material behind it.

Heat resistant materials such as slate and marble must be at least 1/2" thick.

Sheet metal should not be installed onto combustible material.

10" and less Mantel

HEAT RESISTANT

 

MATERIAL

 

12" WITHOUT

28"

HOOD

 

 

12"

HEATER IN FIREPLACE

OR FIREBOX

Figure 4

If your installation does not meet the above clearances, you must proceed to one of the following steps:

•Use a hood

•Operate the heater with flue damper open. See page 10 for Installing as a Vented Appliance.

•Raise the mantel to the proper height.

•Remove the mantel.

Non - Combustible

Requirements for Safe Installation

Material Distance

 

12" or more

Non-combustible material

Less than 12"

Non-combustible material must be extended

 

to at least 8" with the installation of the op-

 

tional fireplace hood. If you cannot extend

 

non-combustible material at least 8", you

 

must operate heater with flue damper open.

Mantel Clearances with Hood (Figure 5)

You must have non-combustible materials above the fireplace opening. Non-combustible material must extend at least 8" above fireplace opening. With sheet metal, you must have non-combustible material behind it.

Heat resistant materials such as slate and marble must be at least 1/2" thick.

Sheet metal should not be installed onto combustible material.

Example: A mantel may project from the wall a maximum of 2" at a mini- mum of 13-1/2" above the opening, and a maximum of 6" at a minimum of 15" above the opening.

 

8" Mantel

 

 

6" Mantel

 

 

4" Mantel

 

HEAT RESISTANT

2" Mantel

 

 

 

MATERIAL

 

 

8" WITH HOOD

14.25"

16.0"

 

13.5"

15.0"

HOOD

HEATER IN

FIREPLACE

OR FIREBOX

Figure 5

If your installation does not meet the above minimum clearances, you must proceed to one of the following steps:

•Operate the heater with the flue damper open. See page 10 for Installing as a Vented Appliance.

•Raise the mantel to the proper height.

•Remove the mantel.

Floor Clearance (Figure 6)

If installing heater at floor level, the minimum distance to combustibles is “0” inches.

Figure 6

Page 8

18954-2-0107

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Instructions Millivolt Variable ManualTable of Contents Important Safety Information Do not Tamper with Pilot Light SafetyCarbon Monoxide Poisoning MAY Lead to DeathSafety Information for Users of LP-GAS LP-GAS Warning OdorNew Installation IntroductionMake sure you have received all parts General InformationBefore you get started Clearances Glass DoorsClearances Combustible Material Fireplace PreparationInstalling Damper Clamp Figure Installing AS a Vented ApplianceBefore Fully Installing the Appliance Installing a New Main Gas Cock Pressure Testing of the Gas Supply SystemGAS Supply Recommended Gas Pipe DiameterPlacement of Glowing Embers and Lava Rock Operation INSTRUCTIONS/FLAME AppearancePlacing Lava Rock in Front of Burner on Fireplace Floor Variable Figure Millivolt Figure Manual FigureVFSR-16,18,24,30 Lighting Instructions What to do if YOU Smell GASLighting Instructions VFSM-18,24,30 Lighting Instructions Pilot Flame Characteristics Vfsr PilotVfsv and Vfsm Pilot Correct Pilot Flame Pattern Incorrect Pilot Flame PatternCleaning and Servicing Turn OFF Heater and Allow to Cool Before CleaningVfsv WiringVfsr Gas odor even when control knob is in OFF position Heater produces a whistling noise when main burner is litNew Installation Appliance produces unwanted odorsParts List Index Part DescriptionParts View HOW to Order Repair Parts Service Notes Service Notes

VFSM-30-3 specifications

The Empire Comfort Systems VFSM-30-3 is a state-of-the-art vent-free gas fireplace that combines functionality with aesthetic appeal. Ideal for homes without traditional venting systems, this fireplace brings warmth and a cozy ambiance to any space while maintaining an efficient energy usage standard.

One of the main features of the VFSM-30-3 is its impressive heat output. With a heating capacity of up to 30,000 BTUs, it effectively warms areas up to 1,200 square feet, making it suitable for both small and large living spaces. The unit’s design incorporates a durable steel construction, ensuring longevity and resistance to wear over time.

The versatility of the Empire VFSM-30-3 is notable, as it can be powered by either natural gas or propane, allowing homeowners flexibility in fuel choice. It also features an adjustable flame height, giving users the option to create their desired level of warmth and ambiance. This is complemented by its realistic log set, which enhances the visual appeal, replicating the look of a traditional wood-burning fireplace.

Another significant characteristic of the VFSM-30-3 is its advanced vent-free technology. This innovative system allows for efficient combustion without the need for a chimney or flue, greatly reducing installation costs and complexities. The vent-free design also ensures that 100% of the heat generated is utilized within the room, providing exceptional energy efficiency.

Safety is a top priority with the Empire VFSM-30-3. The fireplace comes equipped with an oxygen depletion sensor, which automatically shuts off the gas supply if the oxygen levels fall below a safe threshold, providing peace of mind for users.

Installation of the VFSM-30-3 is straightforward, with options for wall mounting or placing it on a hearth. This flexibility allows homeowners to integrate the fireplace into their existing décor seamlessly. Its variety of trim options and finishes further empowers users to personalize their fireplace, ensuring it complements their home’s interior design.

In summary, the Empire Comfort Systems VFSM-30-3 offers a reliable and stylish heating solution for those seeking the charm of a gas fireplace without the challenges of traditional venting. Its combination of efficiency, safety features, and customizable options makes it a remarkable choice for any home.
Top Page Image Contents