Nozzle, Line Hoses, 35 Model Bly, 35 Model

Nozzle

(35 Model)

1.	Remove upper shell (see page 12).
2.	Remove fan (see page 12).
3.	Remove fuel and air line hoses
	from nozzle assembly.
4.	Turn nozzle assembly 1/4 turn to

Combustion

Chamber

Nozzle

Assembly

Burner

Strap

	left and pull toward motor to
	remove.
5.	Place plastic hex-body into vise
	and lightly tighten.
6.	Carefully remove nozzle from the
	nozzle adapter using 5/8" socket
	wrench.
7.	Blow compressed air through face
	of nozzle. This will free any dirt in
	nozzle area.
8.	Inspect nozzle seal for damage.
9.	Replace nozzle into nozzle adapter
	until nozzle seats. Tighten 1/3 turn
	more using 5/8" socket wrench (40-
	45 inch-pounds/4.5-5.1 n-m).
10. Attach nozzle assembly to burner
	strap.
11. Attach fuel and airline hoses to
	nozzle assembly.
12. Replace fan (see page 12).
13. Replace fan guard and upper shell.

Nozzle

(100/150 Models)

1.Remove upper shell (see page 12).

2.Remove fan (see page 12).

3.Remove fuel and air line hoses from burner head.

4.Remove spark plug cable from spark plug.

5.Remove spark plug from burner head using 13/16" open-end wrench.

6.Remove three (3) screws using 5/16" nut-driver and remove burner head from combustion chamber.

7.Place burner head into vise and lightly tighten.

8.Carefully remove nozzle from burn- er head by using 5/8" socket wrench (see Figure 26).

9.Blow compressed air through face of nozzle. This will free any dirt in nozzle area.

10.Inspect nozzle seal for damage.

11.Replace nozzle into burner head and tighten firmly (80-110 inch-pounds/ 9.1-12.4 n-m).

Continued

Assembly

Fuel Line Hose
Air Line Hose
Figure 22 - Removing Air and Fuel	Figure 23 - Removing Nozzle Assem-
Line Hoses, 35 Model	bly, 35 Model

Spark Plug

CombustionBurner HeadCable

Chamber

Screw

Spark

Plug

Air Line Hose

Fuel Line Hose

100577