Important Safety Instructions

IMPORTANT! Read the following important safety instructions to avoid personal injury or death, and to avoid damage to the equipment or property.

WARNINGS

Hatco 3CS2 and FR2 series units are designed for commercial use only by properly trained personnel! To avoid any injury or damage

to the unit read and follow the instructions contained in this manual. Do not operate this equipment unless you have read and completely understood the contents of this manual.

To avoid any electrical shock hazard, or physical burns turn the power OFF at the fuse disconnect switch/circuit breaker or unplug the unit from the power source and allow to cool completely before performing any maintenance or cleaning.

For proper electrical installation conforming to local electrical codes consult a licensed electrical contractor. Improper electrical connections may cause a serious electrical shock injury or may damage the unit.

For proper plumbing installation conforming to local plumbing codes consult a licensed plumbing contractor.

Units equipped with a power cord and plug should be plugged into an electrical outlet

of the correct voltage, size and plug configuration. If the plug and receptacle do not match, contact a qualified electrician to determine the proper voltage and size and install the proper electrical outlet.

To prevent any injury or damage to the unit do not pull unit by power cord.

To prevent any injury, discontinue use if power cord is frayed or worn.

Units are designed to heat water up to 190ºF (88ºC). DO NOT set temperature controls

to a setting higher than 190ºF (88ºC). Water over 190°F (88°C) is very active and could splash onto operator causing serious burns or injury.

To avoid any injury or damage to the unit use only Authorized Hatco Service Agents to perform any temperature display changes.

If service is required on this unit, contact your Authorized Hatco Service Agent, or contact the Hatco Service Department at 800-558-0607 or 414-671-6350; fax 800-690-2966

or International fax 414-671-3976.

WARNINGS

This product has no “user” serviceable parts. To avoid damage to the unit or injury

to personnel, use only Authorized Hatco Service Agents and Genuine Hatco Parts when service is required.

Genuine Hatco Replacement Parts are specified to operate safely in the environments in which they are used. Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely

in Hatco equipment. It is essential to use

Hatco Replacement Parts when repairing Hatco equipment. Failure to use Hatco Replacement Parts may subject operators of the equipment to hazardous electrical voltage, resulting

in electrical shock or burn.

CAUTIONS

Water in the unit and holding vessel is very hot. Wear protective gloves and proper attire when operating to avoid injury.

Do not use extension pipes on the inlet and outlet connections on heater units. Poor performance or unsafe conditions may occur.

Unit is not weatherproof. For safe and proper operation locate the unit indoors where

the ambient air temperature is constant and is a minimum of 70°F (21°C).

1	Form No. HHM-1103

Hatco 3CS2 specifications

The Hatco 3CS2 is a remarkable piece of equipment that showcases Hatco's commitment to excellence in foodservice technology. This countertop heated food display offers efficient food holding, ensuring that your culinary creations remain at the optimal temperature while being presented attractively.

One of the standout features of the Hatco 3CS2 is its sleek design, which fits seamlessly into any buffet or food serving arrangement. Its glass panels provide an unobstructed view of the food, enticing customers while also maintaining hygiene and temperature integrity. The unit’s open-air design allows for easy access, making it convenient for both staff and customers alike.

Equipped with powerful heating elements, the Hatco 3CS2 utilizes advanced infrared technology that ensures even heat distribution throughout the display. This helps maintain the quality, taste, and safety of the food items stored within. Moreover, the adjustable temperature controls allow operators to customize the heat settings based on the specific requirements of the dishes being served, ensuring an ideal serving temperature at all times.

Durability is another hallmark of the Hatco 3CS2. Constructed from high-quality stainless steel and heavy-duty glass, it’s designed to withstand the rigors of a busy kitchen environment. Additionally, the unit is easy to clean, ensuring that maintaining a sanitary workspace is hassle-free.

Safety features are integrated into the design of the Hatco 3CS2, including a safety shut-off mechanism that activates in case of overheating, helping to prevent any potential accidents. This focus on safety complements Hatco’s dedication to creating reliable equipment for foodservice operators.

The Hatco 3CS2 is also energy efficient, combining performance with sustainability. Featuring LED lighting, the display not only enhances food visibility but also contributes to lower energy consumption, making it an environmentally friendly choice.

Overall, the Hatco 3CS2 stands out in the market for its blend of functionality, elegance, and safety. Whether used in restaurants, hotels, or catering services, it enables operators to present food attractively while ensuring it remains hot and delicious for customers to enjoy. With its thoughtful engineering and craftsmanship, the Hatco 3CS2 is an invaluable asset to any foodservice operation.