Empire Products DVC-35T-1, DVC-35IPT-1 installation instructions Installation Instructions

Page 1

INSTALLATION INSTRUCTIONS

AND

OWNER’S MANUAL

FAN TYPE

DIRECT VENT

WALL FURNACE

MODEL

DVC-35T-1

DVC-35IPT-1

EFFECTIVE DATE

JANUARY 2007

Installer: Leave this manual with the appli- ance.

Consumer:Retain this manual for future refer- ence.

Thisappliancemaybeinstalledinanaftermarket, permanentlylocated,manufacturedhome(USA only) or mobile home, where not prohibited by state or local codes.

This appliance is only foruse with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

WARNING: If not installed, operated and maintainedinaccordancewiththemanufactur- er’s instructions, this product could expose you to substances in fuel or from fuel combustion which can cause death or serious illness.

WARNING: If the information in these instruc- tions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

Do not store or use gasoline or other flamma- ble vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas suppli- er’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

13119-6-0107

Page 1

Image 1
Contents Installation Instructions Table of Contents Vent KIT Information Important Safety InformationLearn to recognize the odor of LP-gas. Your local LP-Gas Safety Information for Users of LP-GASHave any question about the gas odor, call your LP-gas Measure under any conditionClear of ALL Obstructions Requirements for MassachusettsIntroduction SpecificationsGAS Supply Installing a New Main Gas CockLocating Gas Supply Recommended Gas Pipe DiameterChecking Manifold Pressure ClearancesClearances Installing Optional Side Outlets Installation InstructionsLocating Wall Opening Using Plastic Expansion Anchors Installation of Three-prong Grounding Plug AssemblyLocating Electric Supply Attaching Furnace to WallReassembly And Resealing Vent-Air Intake System Installing Vent AssemblyDVC-35T Standing Pilot Lighting Instructions For Your Safety Read Before LightingFor Your Safety Read Before Operating Pilot Flame Adjustment Pilot Flame CharacteristicsIP-Model Pilot Wiring Main Burner Flame CharacteristicsThermostat Installation DVC-35TLadder Wiring DIAGRAM-IP Valve Service and Maintenance Suggestions DVC-35IPT Intermittent Pilot Sequence of Operation DVC-35IPT Intermittent Pilot System Troubleshooting Sequence Parts List HOW to Order Repair PartsParts View Service Notes Service Notes 13119-6-0107

DVC-35T-1, DVC-35IPT-1 specifications

Empire Products has long been recognized for its commitment to delivering high-quality heating solutions, and two notable offerings are the DVC-35T-1 and DVC-35IPT-1 gas-burning direct vent fireplaces. These units are designed to provide both comfort and aesthetic appeal, making them excellent choices for any home environment.

The DVC-35T-1 model boasts a classic design, paired with modern efficiency. With a heat output of 35,000 BTUs, it effectively warms spaces up to 1,100 square feet, ensuring even heat distribution throughout the room. One of the standout features is its advanced venting system, which allows for horizontal or vertical venting options, making it versatile for different installation layouts. The DVC-35T-1 also comes equipped with an adjustable flame control, enabling users to customize the ambiance to their preference. Its glass viewing area enhances the overall aesthetic while providing a full view of the flames.

On the other hand, the DVC-35IPT-1 model features an innovative design that incorporates a premium fireplace insert. This unit is specifically engineered to fit into existing fireplaces, transforming traditional wood-burning setups into efficient gas-burning heating sources. Like its counterpart, the DVC-35IPT-1 offers a maximum heat output of 35,000 BTUs, providing substantial warmth tailored for spaces up to 1,100 square feet. It is equipped with a state-of-the-art electronic ignition system, which ensures reliable and easy starts every time. The unit also includes a decorative log set that adds to its realism and charm, allowing for a cozy, inviting atmosphere.

Both models prioritize efficiency, with an impressive thermal efficiency rating, which not only helps in reducing heating costs but also makes them environmentally friendly options. The incorporation of a sealed combustion system ensures that indoor air quality is maintained, as it draws outside air for combustion and expels exhaust gases outdoors.

In addition to their technical features, the DVC-35T-1 and DVC-35IPT-1 are designed with user convenience in mind. Remote control capabilities allow for effortless operation, while easy maintenance ensures that homeowners spend less time worrying about upkeep and more time enjoying their fireplaces.

Overall, the Empire Products DVC-35T-1 and DVC-35IPT-1 fireplaces represent a blend of efficiency, technology, and aesthetic appeal, making them ideal options for those looking to enhance their home environment with reliable and stylish heating solutions.