Scotsman Ice DB-101 owner manual Scotsman

Page 16

SCOTSMAN WOOD FURNACE – INSTRUCTION MANUAL

2.7DUCT CONNECTION (Fig S101-5, Fig S101-1)

See figure S101-12 for Approved Furnace Ductwork Configurations. See figure S101-13 for Prohibited Furnace Ductwork Configurations.

The use of A/C coils is not recommended unless special arrangements are made.

Minimum cross-sectional area of ductwork from furnace should be approximately 180 sq. in. with equal or larger size for return air.

The furnace must not be installed as a gravity system as the controls are not designed for this type of operation.

The dimensions and locations of permissible openings in casings for ducts, blower, or emergency air are clearly identified on the furnace or on specific templates enclosed in the firebox.

DO NOT use duct elbows having an inside radius of less than 6 in (155mm). Use only 16 x 20 in. duct “S” type interconnection for this furnace.

Make or enlarge the openings in the wood furnace casing exactly as identified for add- on connection and on the appropriate side, trim the furnace insulation flush with cut opening. Fasten edges of insulation securely with metal straps or bend tabs of duct starting collar over insulation edge to hold it in place.

Make all duct connections for the “S” type interconnection (See Fig S101-5).

CAUTION - The DB-101-ADD is NOT certified for installations using a divider in the plenum of the oil furnace. An ADD-ON unit must only be connected to a furnace, duct system and chimney, which are in good operating condition. DO NOT relocate any of the safety controls in the original furnace installation. Operate the oil-fired unit periodically to ensure that it will operate satisfactorily when needed.

DO NOT connect to duct work so that a reverse flow is possible. Before attempting installation, determine if there is suitable space available in the furnace area for the furnace connection outlined herein.

The external static pressure in the warm air duct to the house of the original system must be measured prior to any changes to the system. These are to be reset to the same values after the add-on procedure to maintain airflow through the oil furnace.

An important requirement of this type of installation is that when installed in an existing system the main ducts may have to be lowered to assure proper and safe clearances from combustible material. (See Fig S101-1).

After all connections are made a static pressure test and/or temperature measurement must be made in the outlet plenum of the wood furnace. This is a simple procedure and is outlined as follows using a Dwyer Model 25 or equal inclined manometer:

Drill hole in wood outlet plenum.

Level inclined manometer and adjust to zero, insert manometer tube (Pressure end). With all duct work and doors in place static pressure should measure 0.2 in (50 Pa) with blower running.

Scotsman

15

Oct-06

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Scotsman Wood Furnace Table of Contents Specifications Operating Instructions Introduction WOOD-BURNINGCreosote Storage of WoodCase a Serious Creosote Fire Begins Maintenance Cleaning Fig S101-10Cleaning Procedure Maximum SOLID-FUEL ChargeSafety ServicingControls Disposal of AshesElectrical Power Failure Fig S101-3 Installation Instructions Introduction to Installers Homeowner ChecklistApplicable Standards Uncrating Locating the Furnace Fig S101-1, Fig S101-4Combustion AIR Supply Flue Pipe & ChimneyScotsman Clearances Fig S101-1 Minimum safety clearances to combustibles areWarm AIR Duct & Plenum Clearances Low Speed Switching Relay This is an optional part Fig S101 Disconnecting the circulation fan low speed switchADD-ON Fig S101-7, Fig S101-8 Low Speed Switching Relay Installation Instructions Items requiredScotsman Control System Fig S101-5 T822 Room Thermostat Wood FurnaceInstallers Final Checklist Addendum Page Page Page Page Page Page Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-101 specifications

The Scotsman Ice DB-101 is a state-of-the-art ice maker designed for commercial use, catering to restaurants, bars, hotels, and other hospitality venues that require a reliable supply of high-quality ice. This model is highly regarded for its efficiency, power, and innovative technology, making it an ideal choice for businesses looking to enhance their ice production capabilities.

One of the standout features of the Scotsman Ice DB-101 is its ability to produce a significant amount of ice. This ice machine can produce up to 105 pounds of ice per day, depending on ambient conditions, making it suitable for establishments with high ice demands. The unit is designed to create individual half-dice ice cubes, which not only chill beverages efficiently but also provide a visually appealing presentation.

The technology behind the Scotsman Ice DB-101 is impressive. It employs a powerful self-diagnostic control system that allows for easy monitoring of the machine's performance. This feature minimizes downtime by promptly alerting users to potential issues, ensuring that the ice production remains uninterrupted. Additionally, the unit boasts a compact design that fits seamlessly into various spaces while providing substantial ice-making capacity.

Energy efficiency is another hallmark of the Scotsman Ice DB-101. The machine follows eco-friendly standards, consuming less power compared to other models in its class. This feature not only helps in reducing energy bills but also contributes to sustainability efforts within the hospitality industry.

Other notable characteristics include a durable stainless-steel construction that ensures longevity and resistance to corrosion, making it suitable for busy environments. The user-friendly interface allows for easy operation, and the automatic rinse cycle feature maintains ice purity by preventing mineral buildup and ensuring optimal taste.

The Scotsman Ice DB-101 also offers a versatile water source option, compatible with both filtered and standard water, ensuring users can maintain ice quality as per their requirements.

In summary, the Scotsman Ice DB-101 is a top-tier ice machine that combines efficiency, durability, and advanced technology, making it a valued investment for any commercial establishment that relies on a consistent supply of ice for its operations. Its capacity, energy efficiency, and user-friendly design make it a notable choice for industry professionals.
Top Page Image Contents