Scotsman Ice DB-101 Clearances Fig S101-1, Minimum safety clearances to combustibles are

Page 13

SCOTSMAN WOOD FURNACE – INSTRUCTION MANUAL

2.5CLEARANCES (Fig S101-1)

The KERR SCOTSMAN Wood Furnace is to be installed in accordance with National Building Code or local regulations. Allowances front and rear must be made for cleaning and servicing.

NOTE: Regardless of minimum clearances to combustibles for safety reasons, a minimum clearance of 30 in. (765 mm) should be allowed at the furnace rear for cleaning (due to length of cleaning rake) and access to smoke pipe.

Minimum safety clearances to combustibles are:

 

 

Front

48”

1220 mm

Side

6”

152 mm

Side (for rear access)

24”

610 mm

Rear (see Note above)

24”

610 mm

Flue Pipe to combustible, other furnace & electrical wiring

18”

457 mm

Wood Furnace Above Plenum and 6’(1.8 m) of duct

6”

152 mm

Supply Duct beyond 6’

2”

50 mm

Return Duct Plenum and 6’(1.8 m) of duct (Free standing)

3”

76 mm

These clearances will also allow adequate combustion air to reach the furnace.

WARM AIR DUCT & PLENUM CLEARANCES

The following clearances must be observed and must meet all local building, electrical and fire codes. Follow the National Standard of Canada, Installation Code for Solid Fuel Burning Appliances and Equipment, CSA-B365-01; the National Board of Fire Underwriters and in the US the NFPA codes.

The KERR SCOTSMAN Wood Furnace warm air plenum and first 6’ (1.8 m) of warm air supply duct in any direction must be installed observing a minimum of 6 in (152 mm) clearance from the joists or combustible materials. Beyond the first 6’ (1.8 m) of supply duct, a 2” (51 mm) minimum clearance must be maintained between the warm air supply ducts and all joists or combustible material (See Fig S101-1).

Return air ducts, including main ducts and branch ducts, on solid fuel burning warm air furnaces shall be installed to provide at least 3” (76 mm) clearance to combustible construction for the first 6’ (1.8 m) away from the furnace plenum. This requirement is not intended to apply to return air ducts serving an oil-fired, gas fired or electric furnace to which an add-on furnace is connected.

It is recommended that a non-combustible rigid board be fastened on the underside of the floor joists in the area of the ceiling above the furnace, warm air ducts and smoke pipe.

Scotsman

12

Oct-06

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Scotsman Wood Furnace Table of Contents Specifications WOOD-BURNING Operating Instructions IntroductionCreosote Storage of WoodCase a Serious Creosote Fire Begins Cleaning Fig S101-10 MaintenanceCleaning Procedure Maximum SOLID-FUEL ChargeServicing SafetyControls Disposal of AshesElectrical Power Failure Fig S101-3 Installation Instructions Introduction to Installers Homeowner ChecklistApplicable Standards Locating the Furnace Fig S101-1, Fig S101-4 UncratingFlue Pipe & Chimney Combustion AIR SupplyScotsman Clearances Fig S101-1 Minimum safety clearances to combustibles areWarm AIR Duct & Plenum Clearances Low Speed Switching Relay This is an optional part Fig S101 Disconnecting the circulation fan low speed switchADD-ON Fig S101-7, Fig S101-8 Items required Low Speed Switching Relay Installation InstructionsScotsman T822 Room Thermostat Wood Furnace Control System Fig S101-5Installers Final Checklist Addendum Page Page Page Page Page Page Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-101 specifications

The Scotsman Ice DB-101 is a state-of-the-art ice maker designed for commercial use, catering to restaurants, bars, hotels, and other hospitality venues that require a reliable supply of high-quality ice. This model is highly regarded for its efficiency, power, and innovative technology, making it an ideal choice for businesses looking to enhance their ice production capabilities.

One of the standout features of the Scotsman Ice DB-101 is its ability to produce a significant amount of ice. This ice machine can produce up to 105 pounds of ice per day, depending on ambient conditions, making it suitable for establishments with high ice demands. The unit is designed to create individual half-dice ice cubes, which not only chill beverages efficiently but also provide a visually appealing presentation.

The technology behind the Scotsman Ice DB-101 is impressive. It employs a powerful self-diagnostic control system that allows for easy monitoring of the machine's performance. This feature minimizes downtime by promptly alerting users to potential issues, ensuring that the ice production remains uninterrupted. Additionally, the unit boasts a compact design that fits seamlessly into various spaces while providing substantial ice-making capacity.

Energy efficiency is another hallmark of the Scotsman Ice DB-101. The machine follows eco-friendly standards, consuming less power compared to other models in its class. This feature not only helps in reducing energy bills but also contributes to sustainability efforts within the hospitality industry.

Other notable characteristics include a durable stainless-steel construction that ensures longevity and resistance to corrosion, making it suitable for busy environments. The user-friendly interface allows for easy operation, and the automatic rinse cycle feature maintains ice purity by preventing mineral buildup and ensuring optimal taste.

The Scotsman Ice DB-101 also offers a versatile water source option, compatible with both filtered and standard water, ensuring users can maintain ice quality as per their requirements.

In summary, the Scotsman Ice DB-101 is a top-tier ice machine that combines efficiency, durability, and advanced technology, making it a valued investment for any commercial establishment that relies on a consistent supply of ice for its operations. Its capacity, energy efficiency, and user-friendly design make it a notable choice for industry professionals.
Top Page Image Contents