Scotsman Ice DB-101 owner manual Uncrating, Locating the Furnace Fig S101-1, Fig S101-4

Page 10

SCOTSMAN WOOD FURNACE – INSTRUCTION MANUAL

2.2UNCRATING

When you receive your KERR SCOTSMAN Wood Furnace, check it carefully to ensure that all components are present and in good condition. If there has been any damage or loss in transportation, please notify the carrier and retailer at once. Inspect for the following:

oFirebox/Heat exchanger o Poker/coals rake

o Marking template (return air and power failure bypass inlet) o Internal Breech Baffle (Scotsman only)

o For free-standing model optional equipment required:

a)BC-9 Blower Kit (Scotsman only)

b)Control Kit “B” (Scotsman only)

CONTROL KIT A (Oil add-on), B (free-standing with BC–9 blower) or E (Electric add- on) selected according to installation, which includes:

oL4064R Fan and Limit Control o Control Mounting Plate

o Damper Motor

o Thermostat (T822D or equivalent) o Wiring Harness and Parts

o Switching Relay R8405C (8A05A – 4) – Kit “A” & “E” only

o Transformer– Kit “B” only

NOTE: Some parts may be packed inside furnace firebox. Check shipment carefully before assuming shortage.

2.3LOCATING THE FURNACE (Fig S101-1, Fig S101-4)

The location of the furnace must be as close as possible to the tile-lined brick chimney, or factory-built solid-fuel approved chimney (ULC S629). Keep in mind also the day-to- day operation, and place for ease of fueling and cleaning. KERR recommends installation if possible, in a central location in relation to the outlet registers and the use of large warm air ducts to improve heat distribution during a power failure.

It is important to provide adequate combustion air to the furnace. It may be necessary to add a ventilator to an exterior wall of a closed furnace room or an airtight basement.

The furnace must be installed so that the clearances as shown in Fig S101-1, or those of local authorities are met. If the furnace must be installed on a combustible floor, a non-combustible base must be built as shown in Fig S101-4. Two layers of hollow masonry block (4” thick) are placed at right angles to each other so that the ventilation holes of one layer are opposite to those of the other layer. Also there must be a minimum of one layer of fireproof board and one layer of 26 gauge galvanized metal beneath the masonry blocks. This base must extend beyond the furnace to a minimum distance of 18 in (457 mm) in front and 8 in. (204 mm) on all sides.

Scotsman

9

Oct-06

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Scotsman Wood Furnace Table of Contents Specifications Operating Instructions Introduction WOOD-BURNINGCreosote Storage of WoodCase a Serious Creosote Fire Begins Cleaning Procedure MaintenanceCleaning Fig S101-10 Maximum SOLID-FUEL ChargeControls SafetyServicing Disposal of AshesElectrical Power Failure Fig S101-3 Installation Instructions Introduction to Installers Homeowner ChecklistApplicable Standards Uncrating Locating the Furnace Fig S101-1, Fig S101-4Combustion AIR Supply Flue Pipe & ChimneyScotsman Clearances Fig S101-1 Minimum safety clearances to combustibles areWarm AIR Duct & Plenum Clearances Low Speed Switching Relay This is an optional part Fig S101 Disconnecting the circulation fan low speed switchADD-ON Fig S101-7, Fig S101-8 Low Speed Switching Relay Installation Instructions Items requiredScotsman Control System Fig S101-5 T822 Room Thermostat Wood FurnaceInstallers Final Checklist Addendum Page Page Page Page Page Page Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-101 specifications

The Scotsman Ice DB-101 is a state-of-the-art ice maker designed for commercial use, catering to restaurants, bars, hotels, and other hospitality venues that require a reliable supply of high-quality ice. This model is highly regarded for its efficiency, power, and innovative technology, making it an ideal choice for businesses looking to enhance their ice production capabilities.

One of the standout features of the Scotsman Ice DB-101 is its ability to produce a significant amount of ice. This ice machine can produce up to 105 pounds of ice per day, depending on ambient conditions, making it suitable for establishments with high ice demands. The unit is designed to create individual half-dice ice cubes, which not only chill beverages efficiently but also provide a visually appealing presentation.

The technology behind the Scotsman Ice DB-101 is impressive. It employs a powerful self-diagnostic control system that allows for easy monitoring of the machine's performance. This feature minimizes downtime by promptly alerting users to potential issues, ensuring that the ice production remains uninterrupted. Additionally, the unit boasts a compact design that fits seamlessly into various spaces while providing substantial ice-making capacity.

Energy efficiency is another hallmark of the Scotsman Ice DB-101. The machine follows eco-friendly standards, consuming less power compared to other models in its class. This feature not only helps in reducing energy bills but also contributes to sustainability efforts within the hospitality industry.

Other notable characteristics include a durable stainless-steel construction that ensures longevity and resistance to corrosion, making it suitable for busy environments. The user-friendly interface allows for easy operation, and the automatic rinse cycle feature maintains ice purity by preventing mineral buildup and ensuring optimal taste.

The Scotsman Ice DB-101 also offers a versatile water source option, compatible with both filtered and standard water, ensuring users can maintain ice quality as per their requirements.

In summary, the Scotsman Ice DB-101 is a top-tier ice machine that combines efficiency, durability, and advanced technology, making it a valued investment for any commercial establishment that relies on a consistent supply of ice for its operations. Its capacity, energy efficiency, and user-friendly design make it a notable choice for industry professionals.
Top Page Image Contents