Scotsman Ice DB-101 owner manual Installers Final Checklist

Page 18

SCOTSMAN WOOD FURNACE – INSTRUCTION MANUAL

M847 – Damper Motor

The damper door lever should be attached to the damper motor wheel with the chain included. Be sure the damper door is fully closed and the damper motor is not powered. Connect the chain to the damper door level and to the bottom hole in the damper motor wheel. As a final adjustment bend the top chain link slightly to vary the damper position.

L4064R – Wood Furnace/Limit Control

The fan and limit control mounted in the plenum controls the operation of the circulating blower and limits the air temperature to prevent the furnace from overheating.

Set Points

1)“ON” is usually set to 140?F (60°C). It turns on the circulating blower when the air temperature in the plenum reaches this temperature.

2)“OFF” is usually set to 100°F (38°C). It turns off the circulating blower when the circulating air temperature in the plenum drops to this temperature.

3)“Hi limit” is preset to 280°F (138°C). This will over ride the room thermostat to close fire damper door if the wood furnace overheats.

2.9INSTALLERS FINAL CHECKLIST

DUCTWORK INSPECTION

1)Furnace ducted properly?

2)Proper duct clearances maintained?

FURNACE INSPECTION

1)DO NOT use firebrick in the furnace

2)Check settings on fan limit controls.

WIRING INSPECTION

1)Is main disconnect switch within view?

2)Wiring cables protected from heat and not touching hot surfaces?

FLUE AND SMOKE PIPE INSPECTION

1)Flue inner size equivalent to 7” round or larger?

2)Separate entry and lower to flue for both solid-fuel and oil or gas smoke pipes?

3)Smoke pipe 24 gauge or better?

4)Smoke pipe secured by screws?

5)Draft regulator (if used) set at .05” wc maximum?

6)Clearances of smoke pipe 18” or better from combustible material? Metal protection is recommended.

DEALER TO INSTRUCT HOMEOWNER

1)Keep area around unit clean.

2)Use DRY wood only. Hardwood preferred.

3)Load carefully.

4)Load level no higher than center of door.

5)Remove ash regularly as directed.

6)Watch for soot build up in smoke pipe.

7)Danger of flue fire if poor fuel or poor maintenance produces creosote buildup.

8)Operation of unit during power failure. (i.e. manual operation.)

9)When shutting down for extended periods, clean unit thoroughly.

Scotsman

17

Oct-06

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Scotsman Wood Furnace Table of Contents Specifications Operating Instructions Introduction WOOD-BURNINGStorage of Wood CreosoteCase a Serious Creosote Fire Begins Cleaning Procedure MaintenanceCleaning Fig S101-10 Maximum SOLID-FUEL ChargeControls SafetyServicing Disposal of AshesElectrical Power Failure Fig S101-3 Homeowner Checklist Installation Instructions Introduction to InstallersApplicable Standards Uncrating Locating the Furnace Fig S101-1, Fig S101-4Combustion AIR Supply Flue Pipe & ChimneyScotsman Minimum safety clearances to combustibles are Clearances Fig S101-1Warm AIR Duct & Plenum Clearances Disconnecting the circulation fan low speed switch Low Speed Switching Relay This is an optional part Fig S101ADD-ON Fig S101-7, Fig S101-8 Low Speed Switching Relay Installation Instructions Items requiredScotsman Control System Fig S101-5 T822 Room Thermostat Wood FurnaceInstallers Final Checklist Addendum Page Page Page Page Page Page Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-101 specifications

The Scotsman Ice DB-101 is a state-of-the-art ice maker designed for commercial use, catering to restaurants, bars, hotels, and other hospitality venues that require a reliable supply of high-quality ice. This model is highly regarded for its efficiency, power, and innovative technology, making it an ideal choice for businesses looking to enhance their ice production capabilities.

One of the standout features of the Scotsman Ice DB-101 is its ability to produce a significant amount of ice. This ice machine can produce up to 105 pounds of ice per day, depending on ambient conditions, making it suitable for establishments with high ice demands. The unit is designed to create individual half-dice ice cubes, which not only chill beverages efficiently but also provide a visually appealing presentation.

The technology behind the Scotsman Ice DB-101 is impressive. It employs a powerful self-diagnostic control system that allows for easy monitoring of the machine's performance. This feature minimizes downtime by promptly alerting users to potential issues, ensuring that the ice production remains uninterrupted. Additionally, the unit boasts a compact design that fits seamlessly into various spaces while providing substantial ice-making capacity.

Energy efficiency is another hallmark of the Scotsman Ice DB-101. The machine follows eco-friendly standards, consuming less power compared to other models in its class. This feature not only helps in reducing energy bills but also contributes to sustainability efforts within the hospitality industry.

Other notable characteristics include a durable stainless-steel construction that ensures longevity and resistance to corrosion, making it suitable for busy environments. The user-friendly interface allows for easy operation, and the automatic rinse cycle feature maintains ice purity by preventing mineral buildup and ensuring optimal taste.

The Scotsman Ice DB-101 also offers a versatile water source option, compatible with both filtered and standard water, ensuring users can maintain ice quality as per their requirements.

In summary, the Scotsman Ice DB-101 is a top-tier ice machine that combines efficiency, durability, and advanced technology, making it a valued investment for any commercial establishment that relies on a consistent supply of ice for its operations. Its capacity, energy efficiency, and user-friendly design make it a notable choice for industry professionals.
Top Page Image Contents