Scotsman Ice DB-101 owner manual Servicing, Safety, Controls, Disposal of Ashes

Page 7

SCOTSMAN WOOD FURNACE – INSTRUCTION MANUAL

DISPOSAL OF ASHES

Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a non-combustible floor or on the ground, well away from all combustible materials, pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled.

WARNING – Ashes usually contain live dormant coals, which may burn for many hours after a recognizable flame has disappeared. Use extreme caution when handling and disposing ashes.

IMPORTANT – No other waste shall be placed in this container.

1.5.2SERVICING

The furnace air filter must be checked monthly and replaced each year. Annually lubricate the blower motor, if it is not permanently lubricated, with 4-6 drops of SAE-30 oil in each bearing.

CAUTION: Failure to keep air filter clean will result in poor furnace performance and possible damage to wood furnace heat exchanger.

1.6SAFETY

If the furnace overheats due to improper operation the following precautions should be taken:

DO NOT shut off power. The blower must be kept running to disperse excessive heat. Manually close the damper door by unhooking the chain. Check controls for proper operation before starting a new fire.

WARNING – The maximum opening of the combustion air damper is preset at the factory. DO NOT adjust the stop or attempt to increase the combustion air by any means.

1.7CONTROLS

Thermostat

The primary control is the room thermostat located near the center of the house on the main floor or near an existing thermostat. The thermostat operates the damper motor to open and close the damper door thus allowing more or less air into the combustion area to control the fire.

Fan and Limit

The fan and limit control mounted in the plenum controls the operation of the circulating blower and prevents the furnace from over-heating. When the air temperature in the plenum reaches the “ON” set point of the fan switch (usually 140º F (60º C)) the blower starts and runs until the plenum cools to the “OFF” set point (usually 100º F (38º C)) when the blower is switched off. The limit function in this control is usually set at (280º F (138º C)) and will override the room thermostat to close the damper door if the furnace overheats, and will also prevent the oil furnace from starting.

Scotsman

6

Oct-06

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Scotsman Wood Furnace Table of Contents Specifications WOOD-BURNING Operating Instructions IntroductionCreosote Storage of WoodCase a Serious Creosote Fire Begins Maximum SOLID-FUEL Charge MaintenanceCleaning Fig S101-10 Cleaning ProcedureDisposal of Ashes SafetyServicing ControlsElectrical Power Failure Fig S101-3 Installation Instructions Introduction to Installers Homeowner ChecklistApplicable Standards Locating the Furnace Fig S101-1, Fig S101-4 UncratingFlue Pipe & Chimney Combustion AIR SupplyScotsman Clearances Fig S101-1 Minimum safety clearances to combustibles areWarm AIR Duct & Plenum Clearances Low Speed Switching Relay This is an optional part Fig S101 Disconnecting the circulation fan low speed switchADD-ON Fig S101-7, Fig S101-8 Items required Low Speed Switching Relay Installation InstructionsScotsman T822 Room Thermostat Wood Furnace Control System Fig S101-5Installers Final Checklist Addendum Page Page Page Page Page Page Page Page Page Page Page Page Page Terms and Conditions of Warranty Year Warranty

DB-101 specifications

The Scotsman Ice DB-101 is a state-of-the-art ice maker designed for commercial use, catering to restaurants, bars, hotels, and other hospitality venues that require a reliable supply of high-quality ice. This model is highly regarded for its efficiency, power, and innovative technology, making it an ideal choice for businesses looking to enhance their ice production capabilities.

One of the standout features of the Scotsman Ice DB-101 is its ability to produce a significant amount of ice. This ice machine can produce up to 105 pounds of ice per day, depending on ambient conditions, making it suitable for establishments with high ice demands. The unit is designed to create individual half-dice ice cubes, which not only chill beverages efficiently but also provide a visually appealing presentation.

The technology behind the Scotsman Ice DB-101 is impressive. It employs a powerful self-diagnostic control system that allows for easy monitoring of the machine's performance. This feature minimizes downtime by promptly alerting users to potential issues, ensuring that the ice production remains uninterrupted. Additionally, the unit boasts a compact design that fits seamlessly into various spaces while providing substantial ice-making capacity.

Energy efficiency is another hallmark of the Scotsman Ice DB-101. The machine follows eco-friendly standards, consuming less power compared to other models in its class. This feature not only helps in reducing energy bills but also contributes to sustainability efforts within the hospitality industry.

Other notable characteristics include a durable stainless-steel construction that ensures longevity and resistance to corrosion, making it suitable for busy environments. The user-friendly interface allows for easy operation, and the automatic rinse cycle feature maintains ice purity by preventing mineral buildup and ensuring optimal taste.

The Scotsman Ice DB-101 also offers a versatile water source option, compatible with both filtered and standard water, ensuring users can maintain ice quality as per their requirements.

In summary, the Scotsman Ice DB-101 is a top-tier ice machine that combines efficiency, durability, and advanced technology, making it a valued investment for any commercial establishment that relies on a consistent supply of ice for its operations. Its capacity, energy efficiency, and user-friendly design make it a notable choice for industry professionals.
Top Page Image Contents