Trane TCONT803AS32DA, TCONT802AS32DA Installer Setup Menu Factory Setting Other Choices

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION

IMPORTANT

The Installer Setup Menu (Table 4) shows all the available options. These options customize themselves as you make selections to the Installer Setup. Therefore, not all Installer Setup Selections are shown or are avail- able to change.

Table 4. Installer Setup Menu.

		Factory Setting			Other Choices
	Installer
Select	Setup
	Number	Option	Description	Options	Description	Comments
Not used.	1 thru	—	—	—	—	—
	0099
Date (Year	0120	20	Set first two digits of	21	21 —first two digits of current	2000 - 2178 available
Upper)			current calendar year		calendar year (21xx)
			(20 for year 2005, etc)
Date (Year	0130	05	Represents last two	00 -99	Select last two digits of current	2000 - 2178 available
Lower)			digits of current		calendar year.
			calendar year (2005).
Date (Month)	0140	6	Digit(s) represents	1-12	Select number that represents	—
			current calendar		current calendar month.
			month.
Date	0150	15	Digit(s) represents	1-31	Select number that represents	—
(Day)			current calendar date.		current calendar date.
Schedule	0160	4	7-day programming	0	0—nonprogrammable	—
Options
System Type	0170	1	1 Heat/1Cool	1-12	1—1heat/1cool	Available options and
Selection					2—single-stage heat pump (no	defaults vary by
					aux. heat)	comfort control.
					3—heat only (no fan)	System selection
					4—heat only (with fan)	automatically
					5—hot water Series 20 (3-wire	modifies some
					or normally open zone valves)	default settings and/
					6—cool only	or hides other
					7—2 heat/1cool heat pump	Installer Setup
					8—2 heat/2 cool	options.
					9—2 heat/1cool
					10—1 heat/2 cool oil furnace
					or 0H/2C
					11—2 heat/2 cool heat pump
					(with no auxiliary heat)
					12—3 heat/2 cool heat pump
					(with auxiliary heat)
Fan Operation	0180	0	Heat/Cool	1	Heat pump or electric heat	Only shown if heat/
			applications where		applications where comfort	cool system is
			equipment controls		control controls fan operation	selected. If heat
			fan operation in heat		in heat mode.	pump is chosen, fan
			mode.			defaults to electric.
Backup Heat	0200	0	Heat pump backup	1	Heat pump backup heat	Only shown if 2 heat/
Source			heat source is electric.		source is fossil fuel.	1 cool or 3 heat/2
(Auxiliary						cool heat pump is
Heat)						chosen.
External	0210	1	External fossil fuel kit	0	No external fossil fuel kit is	Only shown if fossil
Fossil Fuel Kit			is controlling heat		controlling heat pump backup	fuel is chosen as
			pump backup heat		heat. This comfort control	backup heat source.
			(recommended)		controls the backup fossil fuel
					heat with outdoor sensor.
Cycles per	0220	3	Compressor Stage 1	1-6	1-6 available;	—
hour (cph) for			cycles per hour (cph)		3 is recommended.
1st Stage
Compressor
Cycles per	0230	3	Compressor Stage 2	1-6	1-6 available;	Only shown if two
hour (cph) for			cycles per hour (cph)		3 is recommended.	stages of cool are
2nd Stage						selected.
Compressor

Pub. No. 18-HD25D19-3
69-1790—3	12