Trane TCONT802AS32DA, TCONT803AS32DA installation instructions Cycles per 0240 Heat Stage 1 cycles

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION

Table 4. Installer Setup Menu. (Continued)

		Factory Setting			Other Choices
	Installer
Select	Setup
	Number	Option	Description	Options	Description	Comments
Cycles per	0240	5	Heat Stage 1 cycles	1-12	1-12 available; typical settings:	Not shown if system
hour (cph) for			per hour (cph)		1—1 cph used for steam or	selection is heat
1st Stage					gravity system.	pump. Selection in
Heat					3—3 cph used for 2-stage	this stage changes
					fossil fuel forced air systems or	default cph for 2nd
					hot water systems.	stage heat.
					5—5 cph used for single-stage
					fossil fuel forced air systems.
					9—9 cph used for electric
					forced air heat systems
					(electric auxiliary heat for heat
					pump systems).
Cycles per	0250	5	Cycles per hour (cph)	1-12	1-12 available; typical settings:	Only shown if two
hour (cph) for			for 2nd Stage Heat or		1—1 cph used for steam or	stages of heat are
2nd Stage			Auxiliary Heat for		gravity system.	selected.
Heat			2 H/1C Heat Pump		3—3 cph used for 2-stage
			Systems		fossil fuel forced air systems or
					hot water systems.
					5—5 cph used for single-stage
					fossil fuel forced air systems.
					9—9 cph used for electric
					forced air heat systems
					(electric auxiliary heat for heat
					pump systems).
Cycles per	0260	9	Cycles per hour (cph)	1-12	1-12 available; typical settings:	Only shown if 3H/2C
hour (cph) for			for Auxiliary Heat in		1—1cph used for steam or	heat pump system is
3rd Stage			3H/2C Heat Pump		gravity system.	selected.
Heat			Systems		3—3 cph used for 2-stage
					fossil fuel forced air systems or
					hot water systems.
					5—5 cph used for single-stage
					fossil fuel forced air systems.
					9—9 cph used for electric
					forced air heat systems
					(electric auxiliary heat for heat
					pump systems).
Cycles per	0270	9	Cycles per hour (cph)	1-12	1-12 is available; typical	Only shown if 2 heat/
hour (cph) for			for Emergency Heat		settings:	1 cool or 3 heat/2
Em Heat					3—3 cph used for 2-stage	cool heat pump is
					fossil fuel forced air systems or	selected.
					hot water systems.
					5—5 cph used for single-stage
					fossil fuel forced air systems.
					9—9 cph used for electric
					forced air heat systems
					(electric auxiliary heat for heat
					pump systems).
Continuous	0280	0	Backlight not on	1	Backlight is on continuously	Option is always
Backlight			continuously. Comfort		(comfort control must have a	shown; however,
			control backlight		common wire attached for this	continuously on
			comes on with each		function).	backlight works only if
			key press.			comfort control is
						wired with 24 Vac
						Common.
Changeover	0300	0	Manual changeover	1	1—auto changeover	—

	Pub. No. 18-HD25D19-3
13	69-1790—3