Trane PKG-PRC002-EN manual Standard IntelliPak Unit Control Features, IntelliPak Unit Features

Page 70

Controls

Standard IntelliPak® Unit Control Features

All set-up parameters are preset from the factory, requiring less start-up time during installation.

The human interface panel is easy to read and requires less time for building maintenance personnel to learn to interact with the unit. It features a clear language display (in English, Spanish, or French) that shows all of the self- contained unit control parameters, such as system on/off; demand limiting type; night setback setpoints; and many other setpoints. All adjustments are done through the human interface key-pad. Also the human interface panel allows you to monitor diagnostic points such as; sensor failures; supply airflow loss; and inoperative refrigerant circuit. No special tools are required for servicing the unit. Diagnostics are held in memory, even during power loss. This allows the operator/servicer to diagnose the failure root cause.

IntelliPak® Unit Features

•Unit mounted human interface panel with a two line x 40 character language (English, Spanish, or French) display and a 16-function keypad that includes CUSTOM, DIAGNOSTICS, and SERVICE TEST MODE menu keys on IntelliPak® units

•Compressor lead/lag

•FROSTAT™ coil frost protection on all units

•Daytime warmup (occupied mode) on units with heating options and morning warmup operation on all units

•Supply air static overpressurization protection on units with inlet guide vanes and variable frequency drives (VFD’s)

•Supply airflow proving

•Supply air tempering control with heating option

•Supply air heating control on VAV with hydronic heating option

•Mappable sensors and setpoint sources

•Occupied/unoccupied switching

•Timed override activation

•Programmable water purge during unoccupied mode

Human Interface Panel (HI)

The human interface panel provides a

16-button keypad for monitoring, setting, editing and controlling. The HI panel is mounted in the unit’s main control panel, accessible through the unit’s control panel door.

The optional remote-mount version of the human interface (RHI) panel has all the functions of the unit-mounted version, except for the service mode.To use a RHI, the unit must be equipped with the remote HI interface option (model number digit 32 = 2), which includes an interprocessor communications bridge (IPCB). The RHI can be located up to 1,000 feet (304.8 m) from the unit. A single RHI can be used to monitor and control up to four self-contained units, each containing an IPCB.

The main menus of the human interface panels are:

•STATUS is used to monitor all temperatures, pressures, humidities, setpoints, input and output status.

•CUSTOM key allows the user to customize a status report - consisting of up to four screens of the data available in the main Status menu.

•SETPOINT is used to edit all factory preset default setpoints.

Human interface panel is available as unit or remote mounted.

•DIAGNOSTICS allows the user to review active and historical lists of diagnostic conditions. A total of 49 different diagnostics can be read at the human interface (HI) panel and the last 20 diagnostics can be held in an active history buffer log at the HI panel.

•SETUP allows the user to edit control parameters, sensor selections, setpoint source selections, output definitions, and numerous other points in this menu. All points have factory preset values to keep unnecessary editing to a minimum.

•CONFIGURATION allows changing of factory-preset unit configuration information. This information can be edited only if certain options are field- installed or deleted from the unit. For example, if aTrane communication interface (TCI) module or ventilation override module (VOM) were field- installed, the unit configuration will require editing to reflect those options for proper unit operation.

•SERVICE allows servicing or troubleshooting the unit by selecting component control outputs such as compressors, fans, damper position, etc. This menu is accessible only at the unit-mounted human interface panel.

70

PKG-PRC002-EN

Page 69 Page 71
Image 70
Page 69 Page 71
Contents Commercial Self-Contained DecemberIntroduction Signature Series Self-Contained UnitsContents Features and Benefits Standard Features Optional FeaturesIntegrated Self-Contained Systems Integrated Comfort System ICSTrane 3-DScroll Compressor Proven DesignThroughTesting and ResearchLow Torque Variation Supply Air Ductwork Application Considerations Self-ContainedReturn Air Ductwork Equipment Room Location and OrientationIsolation Recommendations Condenser Water PipingUnit Operating Limits Considerations ApplicationAir Cooled CondenserUnit Capacities Procedure Self-ContainedSelection Waterside Economizer CapacitySelection Example Design Conditions Unit SelectionDescription ProcedureModel Number Self-Contained Model Number DescriptionSelf-Contained Accessory Model Number Description Remote Air-Cooled Condenser Model Number Description General Data TonsTable GD-3. SCWF/SIWF Water-Cooled Self-Contained, 42-80Tons SCRF/SIRF Table GD-4. SCRF/SIRF Air-Cooled Self-ContainedGeneral Data CCRC/CIRCHeating Coil Table GD-7. Self-Contained Heating CoilDrops Data Chart PD-5. Airside Pressure DropPerformance DropsAirside Pressure Heating CoilsDischarge Plenum 20 to 38 Ton Unit 42 to 80 Ton UnitAirside Pressure Airside Economizer with Standard Damper Airside Economizer with Traq Damper Waterside Chart PD-21. Waterside Pressure Drop SCWF/SIWF 35Pressure Drop SCWF/SIWF Performance Water-Cooled Data Table PD-1. CFM Capacity Correction TableTable PD-2. SCWF/SIWF 20 Economizer Full Capacity 8,000 cfm Water-Cooled20 Ton Table PD-3. SCWF/SIWF 20 Economizer Low Capacity 8,000 cfmEntering WaterTemp Entering Air 75 F 85 F 95 F Table PD-5. SCWF/SIWF 22 Economizer Full Capacity 8,800 cfm 22 TonTable PD-6. SCWF/SIWF 22 Economizer Low Capacity 8,800 cfm EnteringWaterTemp Entering Air 75 F 85 F 95 F 25 Ton Table PD-9. SCWF/SIWF 25 Economizer Low Capacity 10,000 cfmEntering Water Temp Entering Air 75 F 85 F 95 F 29 Ton Table PD-12. SCWF/SIWF 29 Economizer Low Capacity 11,600 cfm84.2 32 Ton Table PD-15. SCWF/SIWF 32 Economizer Low Capacity 12,800 cfm94.5 35 Ton Table PD-18. SCWF/SIWF 35 Economizer Low Capacity 14,000 cfm401 320 38 Ton Table PD-21. SCWF/SIWF 38 Economizer Low Capacity 15,200 cfm434 373 42 Ton Table PD-24. SCWF/SIWF 42 Economizer Low Capacity 16,800 cfm403 84.1 46 Ton Table PD-27. SCWF/SIWF 46 Economizer Low Capacity 18,400 cfm83.8 52 Ton Table PD-30. SCWF/SIWF 52 Economizer Low Capacity 20,800 cfm596 471 58 Ton Table PD-33. Scwfsiwf 58 Economizer Low Capacity 23,200 cfm663 571 65 Ton Table PD-36. SCWF/SIWF 65 Economizer Low Capacity 26,000 cfmEntering Water Temp Entering Air 72 Ton Table PD-39. SCWF/SIWF 72 Economizer Low Capacity 28,000 cfm83.7 80 Ton Table PD-42. SCWF/SIWF 80 Economizer Low Capacity 29,800 cfm891 761 Air-Cooled Table PD-45. SCRF/SIRF 25 Gross Cooling Capacity 11,600 cfm Table PD-46. SCRF/SIRF 29 Gross Cooling Capacity 12,800 cfm 30 Ton Table PD-47. SCRF/SIRF 30 Gross Cooling Capacity 14,000 cfmTable PD-48. SCRF/SIRF 35 Gross Cooling Capacity 15,200 cfm 40 Ton Table PD-49. SCRF/SIRF 40 Gross Cooling Capacity 18,400 cfm50 Ton Table PD-50. SCRF/SIRF 50 Gross Cooling Capacity 23,200 cfmData60-Ton Performance Air-CooledTable PD-51. SCRF/SIRF 60 Gross Cooling Capacity 29,800 cfm Table PD-52. HotWater Heating Capacity Self-ContainedHeating Coils Table PD-53. Steam Heating CapacityControls Available Input and Output PointsHuman Interface Panel HI Standard IntelliPak Unit Control FeaturesIntelliPak Unit Features Main menus of the human interface panels areControls Operation SequenceControl Sequences Operation Gbas Binary Outputs Generic Building Automation System Module Gbas OptionGbas Analog Inputs Demand Limiting Binary InputWater Purge Airside OptionsAir-Cooled Condensers Inlet GuideVane ControlHeating Electric Occupied ZoneTemperature ControlUnoccupied ZoneTemperature Control Cooling and Heating Heating Hot Water or SteamSupply Air Setpoint Reset Supply Air Temperature Control Unit Sequence OperationSupply Air Tempering Hot Water and Steam Units Only Standard On All Units Zone SensorControls Options Model Number Digit 6 = A, BAYSENS017Thermometer to indicate temperature in the zone Setpoint thumbwheel for local setpoint adjustment Selection Procedures Electrical DataTable ED-6. Single Stage Electric Heat Electrical Data Electrical Data SCWF/SCRFTable ED-7. CCRC/CIRC Condenser Electrical Data Dimensions Self-Contained Weights Tons Ton Self-ContainedDimensions Self-Contained Weights 40-80 Ton Discharge Dimensions Metric mm Detail B Discharge DimensionsDischarge Dimensions English inches Detail a Electrical ConnectionsDimensions Air-Cooled Weights Condenser Ccrc Unit DimensionsRefrigerant and Electrical Connections DimensionsWeights Front View Looking at Control PanelHot Water Coil Steam CoilPlenum Dimensions Metric mm DimensionsPlenum Dimensions English inches Flexible Horizontal Discharge PlenumEconomizer AirsideAirside Economizer Airside Economizer Dimensions English inches Airside Economizer Dimensions Metric mmZone Sensors Field-InstalledAdjustment Dual Setpoint, Manual/AutomaticFunction Lights Zone Temperature Sensor OnlyProgrammable Night-Setback Sensor Clearances ServiceService/Code Clearance Requirements Self-Contained ModelsTop View CCRC/CIRC 35 Top View CCRC/CIRC 20Top View CCRC/CIRC 50 Table W-2. Unit Weights CCRC/CIRC Dimensions WeightsTable W-1. Unit Weights SCWF/SCRF/SIWF/SIRF Table W-3. Variable Frequency Drive WeightsMechanical Specifications Self-Contained Signature Series Self Contained UnitsMechanical Air-CooledSpecifications Condenser Supply Air Temperature Control with Inlet GuideVanes Mechanical Specifications OptionsAir Volume/Temperature Control Zone Temperature Control Self-Contained OptionsAirside Economizer Interface Comparative Enthalpy ControlStandard Two-Position Damper Interface Airside Economizer Interface with Comparative EnthalpyLow Entering Air Temperature Protection Device Water Flow SwitchService Valves Non-fused Disconnect SwitchCupro-Nickel Condenser Protective Coating CabinetCoils Stainless Steel Drain PanLiterature Order Number

PKG-PRC002-EN specifications

The Trane PKG-PRC002-EN is a groundbreaking packaged rooftop unit designed to meet the diverse needs of commercial and industrial spaces. This model showcases Trane’s commitment to innovation, energy efficiency, and reliability, making it a preferred choice for HVAC professionals and building owners alike.

One of the main features of the PKG-PRC002-EN is its high-efficiency design. This unit leverages advanced technologies to minimize energy consumption while ensuring optimal cooling and heating performance. Its efficient compressor, coupled with enhanced heat exchangers, significantly reduces operating costs and energy bills, aligning with today’s sustainability goals.

The PKG-PRC002-EN features a robust and durable construction, which translates to enhanced longevity and reduced maintenance requirements. Designed for ease of installation, the unit is compact and lightweight, facilitating seamless retrofitting and integration into existing systems. Furthermore, its accessible service panels allow for straightforward maintenance and repairs, thus minimizing downtime and service disruptions.

Equipped with Trane's advanced control technology, the PKG-PRC002-EN offers precise temperature management, ensuring consistent comfort across different zones within a building. The intuitive controls enable users to program schedules and adjust settings based on their specific needs, enhancing comfort while maximizing efficiency.

The model also incorporates advanced filtration options, improving indoor air quality by effectively reducing pollutants and allergens. This focus on health and safety is essential, especially in commercial settings where air quality can significantly impact occupant well-being and productivity.

Another notable characteristic of the PKG-PRC002-EN is its low noise levels during operation, which is essential for maintaining a conducive indoor environment in workplaces, retail spaces, or educational institutions. The unit's design minimizes sound transmission, creating a more pleasant atmosphere for occupants.

In summary, the Trane PKG-PRC002-EN is a highly efficient, reliable, and user-friendly rooftop unit that combines advanced technology with robust construction. Its energy-saving features, superior air quality options, and focus on quiet performance make it an excellent choice for modern commercial HVAC applications, ultimately contributing to sustainable building practices and enhanced occupant comfort.
Top Page Image Contents