Honeywell K9696V2 Multi Software, Road map for using Multi software to obtain video

Page 37

3 Checking for Video

Audience

After installers have field-tested connections (see 2.9 on p. 2–16), the next steps involve working with Multi software from a PC. Your organization’s Multi SA needs to establish that video can be obtaind on a PC. The road map for using Multi software... outlines the work.

!31 Road map for using Multi software to obtain video

1.Locate a PC on which Admin and View have been installed. See 3.1: Multi Software.

2.Use Admin software to:

•create and log on to an empty Multi central database

•name the Rapid Eye site being tested

•add connection information about the Rapid Eye site.

3.Use View software to:

•log on to the Multi central database

•run a “Maintenance” session for the Rapid Eye site, to check the type of camera(s) that were auto-detected by the Multi-Media unit

•run a “Live” session to obtain video.

Why check a connection?

It is useful to establish that the hardware and software installations are in good working order before securing the system (with passwords, user profiles and so on) and establishing a user base (by creating user accounts).

3.1Multi Software

When you run a Multi CD-ROM, the software detects if any Microsoft patches need to be added to your Windows system. All of these patches are available on Microsoft’s web site. For specifics, please consult the Operator Software Setup Instructions for Rapid Eye Multi-Media units, part K5401.

Fig. 22. In organizations where security is a high priority, Admin is not installed on all PCs. The PCs of View operators do not need Admin.

3–1

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Multi-Media Unit Page Issue Date Revisions Page Declaration of Conformity Page Table of Contents Find-it Frequent QuestionsIndex Page Page New to Multi-Media? OverviewNot new to Multi-Media? SoftwareCameras Walking ThroughCommunications Admin and View Software Powering-up the Multi-Media unitOther Hardware Log on to a Multi database, or create one using Admin Start Admin to create a Multi databaseUsing Admin, add a site Database for MultiRunning View Type of ConnectionAdd information about the connection, and save it About connectionsTest the connection use View to run a Maintenance session Testing a ConnectionLog on to View For More Information Where To, Next?Background information Audience Unpacking the UnitRoad map to field work Please do not remove factory seals on a Multi-Media unitItem, one of each, unless otherwise noted Rear Panel ReferencePrinted matter USB port and Printer port TemperaturePowering the Multi-Media Unit Reporting the InstallationPowering Up and Down Unit Recovery Connecting a CameraNominal storage* camera-day time† minute Rapid Dome or Rapid Dome Gold dome systemsSecuring a camera LocalViewReference HardwareLocalView help on operator’s PC To enable the locking of a LocalView functionsMonitors Network Connection To change a LocalView passwordRecording rate fps lowest cycle time sec OverviewTo assign an IP address to a unit using LocalView Using LocalView OnsiteFor a network without Dhcp What next?To setup a terminal program Using a PC OnsiteTo connect a null-modem cable Null-modem cable comes with your Multi-Media unitMulti-Media Unit Installation Instructions Hypertrm.exe icon Windows Click Start and point to … … then clickParameter Value To use the Multi-Media ShellCommand Result Field Name Default Address Shell commandMulti Shell Reference None, port1, port2, or internalTo return to the Multi-Media Shell after a time out Dial-up ConnectionDamaged or Missing Goods Field Testing a ConnectionModem Reference To upgrade a Multi-Media unit’s software, onsite Upgrade CD-ROMUpgrading Unit Software Multi-Media unit without a CD-RW drivePlease continue Why check a connection? Road map for using Multi software to obtain videoMulti Software Some versions of Windows need you to restart the PC To install Multi softwareRunning Admin Using AdminAfter adding security Obtaining a Multi DbDouble-duty logon dialog Adding Site Information Site identification checklistClick Save and Close To name a site Dealing with connections Record of a Dial-up ConnectionConfirmation To make a record of a dial-up connectionDealing with dial-up confusion To make a record of a network connection Record of a Network ConnectionIP Address is mandatory for a network connection Firewall reference Using View to ConnectChecking for video Using Maintenance Testing a Connection MaintenanceTo run a maintenance session on a Rapid Eye site Logging on to ViewCrucial settings for reporting on video of events Testing a Connection TimeTime zone Time zone is set on a unit-by-unit basis To indicate the time zone of a Multi-Media unitConflicting time zones To respond to a notification of conflicting time zones Clock Automatic settingAuto-synch statistics To set a unit’s clock manually, using a PC’sVideo tab in Maintenance session video feed adjustments Testing a Connection CameraObtaining Video To configure a Rapid Eye site’s camerasTo obtain video from a live video session What Next ResultsPlease continue Microphones Audio at a Multi-Media SiteSelecting a microphone Placing a microphonePreventive measures Checking for Audio InterferenceAudio for Operators To enable talking to a siteAt View Operator’s PC To send and receive audio offsiteTo disable audio for LocalView To enable audio for use onsite, by LocalViewTo secure the unit Securing a Multi-Media unitDetachable Camera I/O Unit Hard DiskHard Disk Report To detach the sub-panelHandle on mounted hard disk Hardware OptionsConverter Technical Notes Connecting a PTZ DomeDaisy-chaining Domes Driver name Baud rate Supported controller/dome Alphabetical Configuring PTZInputs for Sensors Alarm SensorsInputs to a Multi-Media unit, used by hardware devices Input Technical NotesNo normally open NC normally closedSystem Monitoring Control OutputsSoftware setup To set the Fault Relay to trigger Alarm panelPoint of Sale Hardware Configuring POSExternal Modems At unit, connected to a networkPort Use Restrictions Using null-modem cable for installation of Multi-Media unitSerial connection Connect only to serial port COM USB port and Parallel portPlease continue Cannot connect to Multi-Media unit, using View Supporting an InstallationFrequently asked question Section No video is reaching View BackgroundSee also PlanningGrounding Coaxial CableLighting Electrical InterferenceHum bar Triaxial cableKnowledge Base Find-itTables Illustrations Use the same database created earlier, using Admin see on pDial-up Networking More FAQs Find-it More FAQsNetwork Connection More FAQs Find-it Organization personnel Personnel Name, telephone #, email Site Information ChecklistSite definition Rapid Eye site… Identification Audio Microphone type Speaker type Comments Communications to unit Connection ValueSite Information Checklist Find-it Sensor hardware Input Type NO, NC, EOL Description Site Information Checklist Find-it Multi-Media Unit Installation Instructions Index Multi-Media Unit Installation Instructions Index Page Page Page Page Honeywell Security Italia SpA Honeywell Security FranceHoneywell Security Espana Honeywell Security House Netherlands

K9696V2 specifications

The Honeywell K9696V2 is a state-of-the-art temperature control device designed for versatile applications in various heating and cooling systems. This advanced controller is known for its precision, reliability, and user-friendly interface, making it an essential component for modern HVAC setups.

One of the main features of the K9696V2 is its ability to support multiple control strategies. It can effectively manage single-stage and multi-stage heating and cooling systems, allowing it to be used in a wide range of residential and commercial applications. This flexibility ensures that users can easily integrate the controller into existing setups without significant modifications.

The K9696V2 incorporates advanced technologies such as microprocessor-based control. This ensures precise temperature management, enhancing comfort while minimizing energy consumption. It features a built-in temperature sensor that provides accurate readings, ensuring that the system operates within the desired range. Users can set temperature thresholds that the controller will maintain, making it ideal for environments where temperature stability is critical.

Another notable characteristic of the Honeywell K9696V2 is its user-friendly interface. The device is equipped with an intuitive digital display that provides real-time temperature readings and system status. Additionally, users can easily navigate through the menu to adjust settings without the need for complicated configurations, which is a significant advantage for both technicians and end-users.

The K9696V2 also offers robust communication capabilities. With support for various communication protocols, including Modbus and BACnet, the device can integrate seamlessly with building management systems. This connectivity allows for remote monitoring and control, giving facility managers greater oversight of their HVAC operations.

Finally, the Honeywell K9696V2 is designed with energy efficiency in mind. By optimizing system performance and providing precise control, this controller helps to reduce energy consumption, translating to cost savings for users. Its durable build ensures longevity, making it a worthy investment for those seeking reliable temperature control solutions.

Overall, the Honeywell K9696V2 stands out in the market due to its advanced features, adaptability, and user-centric design, making it a preferred choice for temperature control in a variety of settings.
Top Page Image Contents