Honeywell K9696V2 To enable audio for use onsite, by LocalView, To disable audio for LocalView

Multi-Media Unit: Installation Instructions

!48 To enable audio for use onsite, by LocalView

1.Using LocalView, on the Audio Setup tab, add a checkmark to the box for Channel 2 (Right) Used by Site Operator for Local Audio Monitoring. The "channel 2" Enable, Record and name are not needed for monitoring audio by a LocalView operator and are removed from view. The Gain controls remain available for both audio channels.

2.In the Channel 1 controls, add checkmarks to the Enable boxes for Talk, Listen or both, as needed.

3.You have the option of adding checkmarks to Record boxes for Talk, Listen or both, as needed. The Enabled box needs to be checked before its Record box can be.

!49 To disable audio for LocalView

•On the Audio Setup tab, remove the checkmark in the box for Channel 2 (Right) Used by ...

4–4